Publications

Research Publications and Presentations

Department: Computer Graphics Technology

Nathan Hartman
  1. Hudecki, A., Hartman, N.W., Miller, J., Coster, M., & Layman, K. (2008). Development of turbine blade generator using US NX 2.0. The Technology Interface Journal, 9 (1). ISSN: 1523-9926. http://technologyinterface.nmsu.edu/
  2. Hartman, N.W. & Miller, C.L. (2006). Examining industry perspectives related to legacy data and technology toolset implementation. The Engineering Design Graphics Journal, 70 (3), 13-22.
  3. Hartman, N.W. (2006). Implementing surface modeling into engineering design graphics curricula: Is there room for more than just solids? The Engineering Design Graphics Journal, 70 (1), 16-22.
  4. Hartman, N.W. & *Branoff, T.J. (2005). Learning theories: Applications for instruction in constraint-based solid modeling and other engineering graphics topics. The Engineering Design Graphics Journal, 69 (2), 6-15.
  5. Hartman, N.W. (2005). Defining expertise in the use of constraint-based CAD tools by examining practicing professionals. The Engineering Design Graphics Journal, 69 (1), 6-15.
  6. Hartman, N.W. (2004). The development of expertise in the use of constraint-based CAD tools: Examining practicing professionals. The Engineering Design Graphics Journal, 68 (2), 14-25.
  7. Wiebe, E.N., *Branoff, T.J., & *Hartman, N.W. (2004). Teaching geometry through dynamic modeling in introductory engineering graphics. The Engineering Design Graphics Journal, 67 (2), 12-20.
  8. Editor’s Award for Outstanding paper in Volume 67 of the Engineering Design Graphics Journal
  9. Branoff, T. J., *Hartman, N. W., & *Wiebe, E. N. (2002). Constraint-based, three-dimensional solid modeling in an introductory engineering graphics course: Re-examining the curriculum. The Engineering Design Graphics Journal, 66 (1), 5-10.
  10. Chair’s Award for Outstanding Technical Paper at the 2001 Annual Meeting of The Engineering Design Graphics Division of The American Society for Engineering Education
  11. Branoff, T. J., *Hartman, N. W. & *Wiebe, E. N. (2002). Constraint-based, solid modeling: What do employers want our students to know? The Engineering Design Graphics Journal, 67 (1), 6-11
  12. Ross, W.A. &  Hartman, N. W. (1997). Engineering animation: A corporate case study.  The Engineering Design Graphics Journal, 62 (1), 4-8.
  13.  
  14. Miller, J.S. & *Hartman, N.W. (2009). Using the end user’s perspective on product lifecycle management critical factors to enhance the success rate of the implementation. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd  Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
  15. Waldenmeyer, K. & *Hartman, N.W. (2009). Standard features and their impact on 3D engineering graphics. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd  Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
  16. Waldenmeyer, K. & *Hartman, N.W. (2009). Multiple CAD formats in a single product data management system: A case study . Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd  Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
  17. Hartman, N.W. & *Zink, M. (2008). JT as a global standard. JT Open International User’s Conference, Dallas, Texas, September 29-30, 2008.
  18. Hartman, N.W. & *Rasche, J. A. (2008). Industry and university partnership: Rolls-Royce/Purdue University PLM collaboration. Conference on Industry and Education Collaboration of The American Society of Engineering Education, New Orleans, LA, February 12 – 15, 2008.
  19. Hudecki, A. & *Hartman, N.W. (2007). Visualizing the manufacturing planning process. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 62nd  Annual Midyear Meeting, Virginia Beach, VA, November 4-6, 2007.
  20. Hartman, N.W., Hoffmann, C.M., & Yang, W. (2007). Examining characteristics of 3dXML and CGR files to support collaboration. Presented at the SME Interoperability and 3D Collaboration Conference, Detroit, MI, May 1-3, 2007.
  21. Hartman, N.W. & *Wittenborn, D.B. (2007). A case study is utilizing legacy CAD data. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 61st Annual Midyear Meeting, San Diego, CA, January 13-16, 2007.
  22. Hartman, N.W. & Miller, C.L. (2005). Implementing a PDM installation and migrating data in a PLM environment. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 60 th Annual Midyear Meeting, Fort Lauderdale, FL,  December 5-7, 2005.
  23. Hartman, N.W. (2004). Addressing the input to the PLM process: Examining the development and definition of expertise in the use of constraint-based CAD tools by practicing professionals. 2nd International Seminar on Digital Enterprise Technology. Seattle, WA, September 13 – 15, 2004.
  24. Miller, C.L. & Hartman, N.W. (2004). Development of an interdisciplinary product lifecycle management (PLM) curriculum. 2nd International Seminar on Digital Enterprise Technology. Seattle, WA, September 13 – 15, 2004.
  25. Ross, W.A., *Hartman, N.W., Brant, J. (2003). Quest for visual realism with CAD data in industrial competition. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 58 th Annual Midyear Meeting, Scottsdale, AZ, November 16-19, 2003.
  26. Branoff, T.J., *Hartman, N.W., & *Wiebe, E.N. (2002). Application of dynamic modeling in introductory engineering graphics classes. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 57 th Annual Midyear Meeting, Indianapolis, IN, October 27-30, 2002.
  27. Chair’s Award for Outstanding Technical Paper at the Conference
  28. Branoff, T.J. & *Hartman, N.W. (2002). The 3D model centered curriculum: Where are we now?  Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 56 th Annual Midyear Meeting, Berkeley, CA, January 6-8, 2002.
  29. Miller, C.L. & *Hartman, N. W.  (1997). Design, implementation, and evaluation of a parametric modeling course. Presented at the American Society for Engineering Education Annual Conference, Albuquerque, NM, June 24-27, 2001.
  30. Miller, C.L. & Hartman, N. W.   (1997). Developing a theoretical /applied parametric modeling course for technology students.  Presented at The Engineering Design Graphics Division of the American Society for Engineering Education, Illinois-Indiana Section Meeting, March, 1997.
  31. Hartman, N.W. & Lim, M.A. (2008). Examining neutral formats for visualization and data exchange. Proceedings of Proceedings of The 2008 IAJC-IJME International Conference, Nashville, TN, November 18-19, 2008, ISBN 978-1-60643-379-9.
  32. Hartman, N.W., *Connolly, P.E., *Wittenborn, D.B., *Miller, C.L. & *Schuver, M.T. (2008). Purdue University – Boeing product lifecycle management certificate program. Proceedings of the 2008 Conference for Industry and Education Collaboration of the American Society for Engineering Education Engineering Technology Division, New Orleans, LA, February 13-15, 2008.
  33. Sarapin, M.I., *Hartman, N.W., & *Bertoline, G.R. (2007). Advancing graduate education in a College of Technology context. Proceedings of the National Association of Industrial Technology Annual Convention, Panama City Beach, FL, October 23-27, 2007.
  34. O’Brien, W., Chandonais, M., Henderson, R. Prezbyndowski, M., *Hartman, N., & Rasche, J. (2006). Using knowledge-based solid modeling techniques and airfoil design data: A case study in developing an airfoil seed part generator. Proceedings of The 2006 IJME - INTERTECH Conference, Union, NJ, October 19 – 21, 2006. (First four authors were members of CGT 411 senior capstone course.)
  35. Hartman, N.W., *Connolly, P.E., Gilger, J.W., Bertoline, G.R., & Heisler, J. (2006). Virtual Reality-based spatial skills assessment and its role in computer graphics education. Presented at the ACM SIGGRAPH Annual Conference, Boston, MA, July 30 – August 3, 2006.
  36. Hartman, N.W. & *Connolly, P.E. (2006). Contemporary CAD tools and spatial abilities: The development of appropriate assessment techniques and educational activities. Presented at the International PACE Forum Collaborative Visualization 2006, Darmstadt, Germany, November 15 – 17, 2006.
  37. Hartman, N.W., *Connolly, P.E., Gilger, J.W., & Bertoline, G.R. (2006). Developing a virtual reality-based spatial visualization assessment instrument. Presented at the American Society for Engineering Education Annual Conference, Chicago, IL, June 18-21, 2006.
  38. Hartman, N.W. & Miller, C.L. (2006). PDM tool selection and integration and the migration of legacy data in a PLM environment. Presented at PLM World, Long Beach, CA, May 8-12, 2006.
  39. Xu, H., *Glotzbach, R.J., Hartman, N.W. (2005). A Complete Strategy for Web Application Security. Proceedings of the American Society for Engineering Education Annual Conference, Portland, OR, June 12-15, 2005.
  40. Branoff, T.J., *Hartman, N.W., & *Wiebe, E.N. (2003). Integrating constraint-based CAD into an introductory engineering graphics course: Activities and grading strategies. Proceedings of the 2003 Annual Meeting of the American Society for Engineering Education, Nashville, TN, June 22-25, 2003.
  41. Branoff, T. J. & *Hartman, N. W. (2002). The 3D model centered curriculum: How do we prepare our students? Proceedings of the 2002 Annual Conference of the Southeastern Section of the American Society for Engineering Education, Gainesville, FL, April 7-9, 2002.
  42. Bertoline, G.R., *Wiebe, E.N., Hartman, N.W., & Ross, W.A. (2009). Technical Graphics Communication (4th ed.). McGraw-Hill: Boston, MA.
  43. ISBN # 978-0-07-312837-5
Tim McGraw

Journal Papers

T. McGraw, T. Kawai, I. Yassine, L. Zhu, “Visualizing High-Order Symmetric Tensor Field Structure
with Differential Operators,” Journal of Applied Mathematics, Volume 2011, July 2011, 27 pages.


T. McGraw, T. Kawai, J. Richards, “Allometric Scaling for Character Design,” Computer Graphics
Forum, Volume 30, Issue, 1, March 2011, pp. 153-168.

T. McGraw, B.C. Vemuri, E. Ozarslan, Y. Chen, T. Mareci, “Variational Denoising of Diffusion-Weighted
MRI,” Inverse Problems and Imaging, Volume 3, Number 4, November 2009, pp. 625-648.


T. McGraw, “Generalized Reaction-Diffusion Textures,” Computers and Graphics, Volume 32, Number
1, February 2008, pp. 82-92.


T. McGraw, M. Nadar, “Stochastic DT-MRI Connectivity Mapping on the GPU,” IEEE Transactions on
Visualization and Computer Graphics, Volume 13, Number 6, November/December 2007, pp. 1504-1511.

T. McGraw, B. C. Vemuri, Y. Chen, M. Rao, T. Mareci, “DT-MRI Denoising and Neuronal Fiber
Tracking,” Medical Image Analysis, Volume 8, Issue 2, June 2004, pp. 95-111.

Conference Proceedings

T. McGraw, T. Kawai, “A Spectral Approach to Nonlocal Mesh Editing,” International Symposium on
Visual Computing, Las Vegas, NV, Nov/Dec 2010, pp. 634-643.


T. McGraw, T. Kawai, I. Yassine, L. Zhu, “New Scalar Measures for Diffusion-Weighted MRI
Visualization,” International Symposium on Visual Computing, Las Vegas, NV, Nov/Dec 2009, pp. 934-
943. (Winner of iCORE Best Paper Award.)


I. Yassine, T. McGraw, “4th Order Diffusion Tensor Interpolation With Divergence and Curl
Constrained Bezier Patches,” 6th International Symposium on Biomedical Imaging : Macro to Nano,
Boston, MA, June 2009, pp. 634-637.


T. McGraw, B. Sowers, “Hardware Accelerated Per-Texel Ambient Occlusion Mapping,” In Proc. 4th
International Symposium on Visual Computing, Las Vegas, NV, December 1-3, 2008, pp. 1125-1134.


I. Yassine, T. McGraw, “A Subdivision Approach to Tensor Field Interpolation,” Workshop On
Computational Diffusion MRI, September 2008, pp. 117-124.


T. McGraw, M. Nadar, “Fast Texture-Based Tensor Field Visualization for DT - MRI,” 4th IEEE
International Symposium on Biomedical Imaging: Macro to Nano, 2007, April 12, 2007, pp. 760-763.


S. Danda, T. McGraw, “A Comparison of the Bilateral Filter and TV-Norm Minimization for Image
Denoising,” 4th IEEE International Symposium on Biomedical Imaging: Macro to Nano, 2007, April 12,
2007, pp. 676-679.


T. McGraw, B.C. Vemuri, B. Yezierski, T. Mareci, “Segmentation of High Angular Resolution Diffusion
MRI Modeled as a Field of von Mises - Fisher Mixtures”, 9th European Conference on Computer
Vision, 2006, May 7, 2006, pp. 461 – 475.


T. McGraw, B.C. Vemuri, B. Yezierski, T. Mareci, “Von Mises - Fisher Mixture Model of the Diffusion
ODF”, 3rd IEEE International Symposium on Biomedical Imaging: Macro to Nano, 2006, April 6, 2006, pp.
65 - 68.

T. McGraw, B. C. Vemuri, Z. Wang, Y. Chen, M. Rao, T. Mareci, “Line Integral Convolution for
Visualization of Fiber Tract Maps from DTI,” Medical Image Computing and Computer Assisted
Intervention,Tokyo, Japan, August 2002.


B.C. Vemuri, Y. Chen, Z. Wang, T. McGraw, T. Mareci, P. Reier, S. Blackband, “Automated Fiber
Tractography from DTI and its Validation,” 2002 IEEE International Symposium on Biomedical Imaging,
July 2002.


B. C. Vemuri, Y. Chen, M.Rao, T. McGraw, Z. Wang and T.Mareci, “Fiber Tract Mapping from Diffusion
Tensor MRI,” Proceedings of the IEEE Workshop on Variational and Level Set Methods, July 2001, pp.
81-88.

 

Carlos Morales
  1. Morales, C. (2005) Using on-line digital video to augment the teaching of frequency/spatial filtering operations. Computers in Education Journal. 15(1), 45-62.
  2. Morales, C. (2004). Animation production pipeline for matching dissimilar modeling, animation, and compositing tools. The Engineering Design Graphics Journal, 68(1), 55-59.
  3. Morales, C. (2004). Development of HDTV distance learning content. Educause Quarterly, 27(3), 6-12.
  4. Morales, C., Weaver, G., Maicher, K., Danforth, D., Martínez-Hernández, K., Pedela, R., Elkin, E., Nattam, N. (2006). The design process of a chemistry video game. 2006 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2004-1747.pdf), Chicago, IL.
  5. Morales, C., Weaver, G., Maicher, K., Danforth, D., Martínez-Hernández, K., Pedela, R., Elkin, E., Nattam, N. (2006) Immersive chemistry video game.  Proceedings for ACM SIGGRAPH, Boston, MA.
  6. Weaver, G., Morales, C., Martínez-Hernández, K., Maicher, K. (2006) Development and Testing of a Chemistry-based Video Game: The Process. The 19thBiennial Conference on Chemical Education. West Lafayette, Indiana.
  7. Martínez-Hernández , K., Danforth, D., Robertson, P, Nattam, N., Morales, C., Weaver, G. (2006). Can video games contribute meaningfully to the Chemistry Curriculum?. The 19thBiennial Conference on Chemical Education. West Lafayette, Indiana.
  8. Morales, C. (2004). HDTV distance learning content. 2004 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2004-1747.pdf), Salt Lake City, UT.
  9. Glotzbach, R., & Morales, C. (2003). Web enabling software for real-time online automated services. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2198.pdf), Nashville, TN.
  10. Morales, C., & Kothary, N. (2003). Implementation of an on-line multimedia collaborative linear algebra tutoring system. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2578.pdf), Nashville, TN.
  11. Morales, C., Glotzbach, R., Gonzales, D. (2003). Implementation of a multi-user on-line geometry collaboration tool. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2578.pdf), Nashville, TN.
  12. Morales, C, & Sole, J. (2002). Trial Results from a Personalized Wireless On-Site Reference Distance Learning Solution.  2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2388.pdf), Montreal, Canada.
  13. Morales, C, & Miller, C. (2002). Delivering Instructional Video Anywhere: An Intelligent Wireless Streaming Video Delivery Mechanism for Mobile Asynchronous Distance Learning.  2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2386.pdf), Montreal, Canada
  14. Morales, C, & Goldenberg, M. (2002). Development of a collaborative multi-user engineering design graphics collaboration tool. 2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2384.pdf), Montreal, Canada.
  15. Morales, C., & Cory, C. (2002). A method for integrating sales information with instructional content over a mobile wireless e-commerce environment for the home improvement market.  2002 Annual Conference Proceedings for Northeast Decision Science Institute (pp. 72-74). Puerto Rico.
  16. Morales, C., Cory C., & Bozell, D. (2001). A comparative efficiency study between a live lecture and a web based live-switched multi-camera streaming video distance learning instructional unit. 2001 Annual Conference Proceedings Information Resources Management Association (pp. 63-66). Hershey, PA.
  17. Morales, C. (2001). Development of an xml web based motion capture data warehousing and translation system for collaborative animation projects.  Proceeding of the 9th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision (pp. 168-173). WSCG, Plzen, Czech Republic.
  18. Morales, C. (2001). A method of delivering dynamic hyperlinked streaming instructional content over a wireless environment through the use of active server pages and xml technology.  2001 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM 00682.pdf), Albuquerque, NM.
  19. Meador, S., & Morales, C. (2001). Implementation of a low budget, raster based, 3D motion capture system using custom software and modern video tracking technology.  2001 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM 00476.pdf), Albuquerque, NM.
  20. Cory, C.A., Morales, C.R., (Feb 2001), A Model for Centralizing and Encapsulating Architectural Production Data and Distributing over the Web through the use of XML, Proceedings for IASTED Conference, Innsbruck Austria. (pg. 527-532) vol. 1.
  21. Homkes R., Morales, C., Taylor, K., & Foster, G. (2000). Implementing a VISION for the future of engineering and technology education. 2nd Global Congress on Engineering Education Proceedings (pp. 226-230). Wismar, Germany: UNESCO International Centre for Engineering Education.
  22. Morales, C. (2000). Defeating the bandwidth: A model for integrating web and cd-rom based training solutions. [CD ROM:proceed/00117.pdf – 11 pages]. 2000 Annual Conference Proceedings for the American Society for Engineering Education, St. Louis, MO.
  23. Homkes, R., Morales, C., Rowe, K., Smith, M. (2000). New engineering faculty  for the new millennium. [CD ROM:proceed/00444.pdf – 11 pages].  2000  Annual Conference Proceedings. American Society for Engineering Education, St. Louis, MO.
  24. Morales, C., & Meador, S. (2000). Trial results from a custom distance learning system based on hybridization of CD-ROM, web, and active-x component technology.  Proceedings of the Information Visualization Conference IV’2000 (pp. 39-43). IEEE Computer Society, Los Alamitos, CA.
  25. Morales, C.  (1999). Integration of high-end and low-end animation tools: A case study of the production pathway for the Chicago Bulls broadcast animation. Proceedings of the Information Visualization Conference IV’99 (pp. 354-362). IEEE Computer Society, Los Alamitos, CA.
  26. Morales, C., Nelson, D. (2007) Mobile 3D Games: From Start to Market. Charles River Media. ISBN # 1584505125
  27. Griffin, J., Morales, C., Finnegan, J. (2002) Web Design & Development Using XHTML. Franklin, Beedle and Associates. ISBN # 1-887902-57-0, 2003.
Mary Sadowski
  1. Sadowski, M. A., Birchman, J.A. & Harris, L.V., (2006) An Assessment of Graphics Faculty and Student Learning Styles. Engineering Design Graphics Journal. 70, (2).
  2. Harris, L.V., Sadowski, M. A., & Birchman, J.A. (2006) A Comparison of Learning Style Models and Assessment Instruments for University Graphics Educators. Engineering Design Graphics Journal.
  3. Harris, L. A., Sadowski, M. A., & Birchman J. A. (2005). The Leap from Teacher to Teacher-Scholar: The Quest for Research in Non-Traditional Fields. Engineering Design Graphics Journal 69, (2).
  4. Harris, L. A. & Sadowski, M. A.(2003) Graph Etiquette: A Paradigm for Presenting Technical Data. Visual Communication Journal. Spring, 51-62. Sadowski, M. A. (2002) Evaluation of Teams within the Academic Setting. Engineering Design Graphics Journal 67, (2).
  5. Sadowski, M. A. (2002) Ensuring the Viability of the Engineering Design Graphics Division for the next 50 years: A brainstorming activity. Engineering Design Graphics Journal, 67, (1).
  6. Sadowski, M. A., Birchman, J.A. & Harris, L.V., (2005) An Assessment of Graphics Faculty and Student Learning Styles. ASEE Annual Conference and Exposition Proceedings, Portland, OR.. cd-rom.
  7. Sadowski, M. A. & Birchman, J.A., (2005). Stategies for Bridging Learning Styles. Engineering. Design Graphics Division 60th MidYear Meeting Proceedings, Ft Lauderdale, FL.
  8. Kelley, D. & Sadowski, M.A., (2005) Peer Evaluation within a Team Design. Engineering. Design Graphics Division 60th MidYear Meeting Proceedings, Ft. Lauderdale, FL.
Mihaela Vorvoreanu

Publications

  1. Vorvoreanu, M. (in press). Perceptions of Corporations on Facebook: An Analysis of Facebook Social Norms. Journal of New Communications Research.
  2. Vorvoreanu, M. (2008). Web site public relations: How corporations build and maintain relationships online. Youngstown, NY: Cambria Press.
  3. Vorvoreanu, M. (2007). Website Experience Analysis: A New Research Protocol for Studying Relationship Building on Corporate Websites. Journal of Website Promotion, 2(1/2).
  4. Vorvoreanu, M. (2007). The public relations Web site experience: Online relationship management. In Duhe, S.C. (Ed). Mediated public relations: Relationship management across space, time, and new media. New York: Peter Lang USA.
  5. Vorvoreanu, M. (2006). Online organization-public relationships: An experience centered approach. Public Relations Review, 32(4), 395-401.
  6. Vorvoreanu, M. (2006). Web site experience analysis. In Reynolds, R., Woods R., & Baker, J.D. (Eds). Handbook of Research on Electronic Surveys and Measurements (pp. 281-284). Hershey, PA: Idea Group.
  7. Botan, C.H., & Vorvoreanu, M. (2004). What meanings do employees derive from electronic surveillance at work? In Weckert, J. (Ed.) Electronic monitoring in the workplace: Controversies and Solutions. Hershey, PA: Idea Group.
  8. Vorvoreanu, M., & Botan, C. H. (2001). Examining electronic surveillance in the workplace: A review of theoretical perspectives and research findings. CERIAS Technical Report 2001-32.
  9. Botan, C. H., & Vorvoreanu, M. (2001). “What are you really saying to me?” Electronic surveillance in the workplace. CERIAS Technical Report 2001-23.

Conference Papers and Presentations

  1. Vorvoreanu, M. (2009). Public relations and social norms on Facebook. Paper presented at the 2009 International Public Relations Research Conference, Miami.
  2. Vorvoreanu, M. (2008). Blogs Matter: Personal, Professional, and Research Implications of Blog Use in Public Relations. Panel presentation at the 2008 National Communication Association Annual Convention, Public Relations Division, San Diego, CA.
  3. Vorvoreanu, M. (2008). Organizational Presence in Second Life: Analysis of Communication Strategies. Panel presentation at the 2008 National Communication Association Annual Convention, Human Communication and Technology Division, San Diego, CA.
  4. Vorvoreanu, M. (2008). Microblogging and Lifestreaming: Idiotic or Brilliant? Panel presentation at the 2008 National Communication Association Annual Convention, Organizational Communication Division, San Diego, CA.
  5. Vorvoreanu, M. (2007). Apologia in India: An audience-centered approach to international public relations. Paper presented at the 2007 International Communication Association Annual Convention, Public Relations Division, San Francisco.
  6. Vorvoreanu, M. (2006). Studying relationship building on corporate Web sites: A new research protocol. Paper presented at the 2006 National Communication Association Annual Convention, Public Relations Division, San Antonio, TX.
  7. Vorvoeanu, M. (2006). The ultimate connection site: A tribute to the Internet. Paper presented at the 2006 National Communication Association Annual Convention, Human Communication and Technology, San Antonio, TX.
  8. Vorvoreanu, M. (2006). “Conferencing” and the ideal speech situation. Panel presentation at the 2006 National Communication Association Annual Convention, Public Relations Division, San Antonio, TX.
  9. Madhavan, K.P.C., Goasguen, S., Bertoline, G.R., & Vorvoreanu, M. (2006). Zecosystem: Cyberinfrastructure-enabled learning ecosystems of 2020. Paper presented at the 2006 Teragrid conference, Indianapolis, IN.
  10. Vorvoreanu, M. (2005). Online organization-public relationships: An experience-centered approach. Paper presented at the National Communication Association Annual Convention, Public Relations Division, Boston.
  11. Vorvoreanu, M. (2005). Internationalization of the U.S. Academe. Presented at the International Communication Association Annual Convention, Theme Sessions, New York.
  12. Vorvoreanu, M. (2004). Applying new technologies in public relations courses. Paper presented at the National Communication Association Annual Convention, Public Relations Division, Chicago, IL.
  13. Vorvoreanu, M. (2003). Teaching Internet public relations. Poster presentation at the National Communication Association Annual Convention, NCA Agora, Miami, FL.
  14. Vorvoreanu, M. (2003). Propagating American imperialism through the domination of writing style. Paper presented at the National Communication Association Annual Convention, Theme sessions, Miami, FL.
  15. Vorvoreanu, M. (2003). Drawing virtual borderlands: Central European countries’ self-presentation strategies on the World Wide Web. Paper presented at the International Communication Association Annual Convention, Theme sessions, San Diego, CA.
  16. Vorvoreanu, M. (2003). Teaching Internet public relations at Purdue University. Poster presentation at the Teaching and Learning with technology Showcase, April 2-3, 2003, West Lafayette, IN.
  17. Vorvoreanu, M. (2003). Creating course Web sites that communicate effectively. Workshop taught at the Teaching and Learning with technology Showcase, April 2-3, 2003, West Lafayette, IN.
  18. Vorvoreanu, M. (2002). Digital rhetoric: A Framework for analyzing Web-based communication. Paper presented at the National Communication Association Annual Convention, Public Relations Division, New Orleans, LA.
  19. Vorvoreanu, M. (2001). Corporate legitimacy on the World Wide Web: A case study. Paper presented at the National Communication Association Annual Convention, Public Relations Division, Atlanta, GA.
  20. Vorvoreanu, M., & Botan, C. (2000). Examining electronic surveillance in the workplace: A review of theoretical perspectives and research findings. Paper presented at the International Communication Association Conference, Communication and Technology Division, Acapulco, Mexico.
  21. Botan, C., & Vorvoreanu, M. (2000). “What are you really saying to me?” Electronic surveillance in the workplace. Paper presented at the International Communication Association Conference, Communication and Technology Division, Acapulco, Mexico.

Invited Presentations

  1. Vovoreanu, M. (2009). Should I Be on Twitter? Invited presentation at the Greenville, SC chapter of the American Advertising Federation, Greenville, SC.
  2. Vorvoreanu, M., & Lee, R. (2009). How to Improve Your ROI with Online News Releases. PRWeb live webinar.
  3. Vorvoreanu, M., Holtz, S., & Wei, J. (2008). How to get more ROI out of your online news releases.  SNCR & PRWeb live webinar.
  4. Vorvoreanu, M. (2008). Public Relations on Facebook: The Public’s Perspective. Invited presentation at the UGA Connect Social Media Conference, Athens, GA.
  5. Vorvoreanu, M., Holtz, S., & Wei, J. (2008). The ROI of Online News Releases. Invited presentation at the Society for New Communications Research Forum, Santa Rosa, CA
  6. Vorvoreanu, M. (2008). Using Social Media Strategically. Invited lecture presented at the South Carolina PRSA Greenville chapter meeting, Greenville, SC.
  7. Vorvoreanu, M. (2006). Foundation: History and Theory of Public Relations. Invited lecture presented at the APR Certification Course offered by the Miami Valley Chapter of the Public Relations Society of America, Dayton, OH.
  8. Vorvoreanu, M. (2005). Highlights from Communication Theory. Invited lecture presented at the APR Certification Course offered by the Miami Valley Chapter of the Public Relations Society of America, Dayton OH.
  9. Botan, C., Vorvoreanu, M., Reding S., & Alge, B. (2001). Workplace Surveillance. Presented at the Second CERIAS Annual Symposium, West Lafayette, IN.
  10. Vorvoreanu, M. (2000) Communicating Risk in Crisis Situations: Challenges and Strategies. Presented at the CERP (Conseil Européen des Relations Publiques) Students Congress, Sinaia, Romania.
  11. Vorvoreanu, M. (2000) Examining Electronic Surveillance in the Workplace. Presented at the CERIAS (Center for Education and Research in Information Assurance and Security) Student Roundtable, West Lafayette, IN.
  12. Botan, C., Vorvoreanu, M., & Applegate, M. (2000). Electronic Surveillance in the Workplace. Presented at the First CERIAS Annual Symposium, West Lafayette, IN.
David Whittinghill
  1. Whittinghill, D., Hartford, J., Brown, J., Hoerter, M., Kennedy, A., Barrett, C. & Hassan, R. (2014). Effect of pre-game tutorials on player performance in Kinect-based health games. Games for Health 3(1): 31-39.
  2. Whittinghill, D. & Brown, J. (2014). Gamification of physical therapy for the treatment of pediatric cerebral palsy: A pilot study examining player preferences. 121st Annual Conference & Exposition, Indianapolis, IN.
  3. Li, S., Chen, Y. & Whittinghill, D. (2014). Exploring the potential for augmented reality to motivate English vocabulary learning in Chinese college students. 121st Annual Conference & Exposition, Indianapolis, IN.
  4. Whittinghill, D., Nelson, D., Richards, K. & Calahan, C. (2014). Improving the affective element in introductory programming coursework for the "non programmer" student. 121st Annual Conference & Exposition, Indianapolis, IN.
  5. Whittinghill, D. & Nelson, D. (2014). Encouraging generalization of programming concepts outside a student's home programming language. ASEE Illinois-Indiana Section Conference, Terre Haute, IN.
  6. Nataraja, K., Head, N. & Whittinghill, D. (2014). An empirical test of an educational video game to teach energy literacy. ASEE Illinois-Indiana Section Conference, Terre Haute, IN.
  7. Steckel, K. & Whittinghill, D. (2014). Z-depth integration: a new technique for manipulating z-depth properties in composited scenes. Engineering Realities of Virtual Reality 2014, San Francisco, CA.
  8. Chen, Y., Oxenrider, M. & Whittinghill, D. (2013). How the social element in game-based learning can interfere with learning outcomes: An examination of the research literature. E-Learn 2013, Las Vegas, NV.
  9. Nataraja, K. & Whittinghill, D. (2013). MAEGUS: A sustainable energy simulation to promote energy literacy. E-Learn 2013, Las Vegas, NV.
  10. Ocasio-de Jesús, V., Kennedy, A. & Whittinghill, D. (2013). Impact of graphical fidelity on physiological responses in virtual environments. Virtual Reality Software and Technology: Proceedings of the 19th ACM Symposium, (VRST 2013), Singapore, pp. 73-76.
  11. Adamo-Villani, N., Oania, M., Whittinghill, D. & Brown, J. (2012). Building a serious game to teach secure coding in introductory programming courses. Eurographics, Calgary, Italy.
  12. Whittinghill, D. & Barrett, C. (March 2012). A Kinect-based physical therapy game for the treatment of pediatric cerebral palsy. Service Engagement Summit Indianapolis, IN.
  13. Adamo-Villani, N., Oania, M., Whittinghill, D. & Brown, J. (2012). Building a serious game to teach secure coding in introductory programming courses. Eurographics Calgary, Italy.
  14. Whittinghill, D., Chin, J. & Leavenworth, W. (2011). A diagnosis and counseling simulation for dental students in training. Midwest Conference on Health Games Indianapolis, IN.
  15. Whittinghill, D., Barrett, C., McIlrath, A., Gary, J. & Sedgwick, T. (October 2011). A game-based simulation of a physical therapy exercise for pediatric cerebral palsy patients using Microsoft Kinect. Midwest Conference on Health Games Indianapolis, IN.
  16. Ropp, T. & Whittinghill, D. (2011). Incorporating pervasive computing concepts into aircraft maintenance job task card systems. ASEE International Annual Conference Vancouver, BC.
  17. Joseph, N. & Whittinghill, D. (2011). Stereoscopic visualization as a tool for teaching astronomy concepts. ASEE International Annual Conference Vancouver, BC.
  18. Whittinghill, D. & Davis, B. (2011). Educational effectiveness of implicit course content embedded within commercial video games. ASEE International Conference Vancouver, BC.
  19. Whittinghill, D. & Lutes, K. (2011). Teaching Enterprise Application Development: Strategies and Challenges. SIGITE West Point, NY.
  20. Estaban Garcia (2011). Art and code: The aesthetic legacy of Aldo Giorgini. Leonardo SIGGRAPH., 44, 309-316.

Department: Engineering Technology

P. Chuang

Journals

  1. Chuang, P. A., Cimbala, J. M., Brenizer, J. S., “Experimental and Analytical Study of a Loop Heat Pipe at Positive Elevation using Neutron Radiography,” International Journal of Thermal Science (Accepted October 2013)
  2. Chen, P. C., Chang, S. M., and Chuang, P. A., “Optimal Oxygen Stoichiometry for Maximum Net Power Output of Proton Exchange Membrane Fuel Cell Systems,” International Journal on Energy Conversion (I.R.E.Con.), Vol. 1, N. 1, January 2013, pp. 4-13
  3. Fultz, D. and Chuang, P. A., “The Property and Performance differences between Catalyst Coated Membrane and Catalyst Coated Diffusion Media,” Journal of Fuel Cell Science and Technology, Volume 8, Issue 4, August 2011
  4. Pekula, N., Heller, K., Chuang, P. A., et al., “Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging,” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, Volume 542, Issues 1-3, 21 April 2005, pp. 134-141
  5. Cimbala, J. M., Brenizer, J. S., Chuang, P. A., et al., “Study of a loop heat pipe using neutron radiography,” Applied Radiation and Isotopes, 61 (2004) 701-705

Refereed Conference Proceedings

  1. Nicotera, P., Evans, R., Weaver, C., and Chuang, P. A., “Gas Diffusion Media for Proton Exchange Membrane Fuel Cells Made from Carbon Fibers with Controlled Conductivity,” MRS Proceedings, 1384, 2012, mrsf11-1384-b16-04
  2. Chuang, P. A., Turhan, A., Heller, K., et al., “The nature of flooding and drying in polymer electrolyte fuel cells,” 3rd International Conference on Fuel Cell Science, Engineering and Technology, May 23-25, 2005, Ypsilanti, MI, USA
  3. Chuang, P. A., Cimbala, J. M., and Brenizer, J. S., “Theoretical and experimental study of a loop heat pipe at positive elevation,” International Mechanical Engineering Congress and RD&D Expo, November 13-19, 2004, Anaheim, CA USA
  4. Chuang, P. A., Cimbala, J. M., and Brenizer, J. S., “Analytical modeling of a loop heat pipe at positive elevation,” International Mechanical Engineering Congress and RD&D Expo, November 13-19, 2004, Anaheim, CA USA
  5. Chuang, P. A., Cimbala, J. M., Brenizer, J. S., et al., “Comparison of experiments and 1-D steady-state model of a loop heat pipe,” International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, LA USA

Invited Talks and Keynote Speeches

  1. “PEM Fuel Cell Diffusion Media and Bipolar Plate for Automotive Application,” 2011 Fuel Cell Key Component Semianr, Industrial Technology Research Institute, September 29, 2004, Hsin-Chu, TAIWAN
  2. “Limiting Current as a Screening Tool for Diffusion Media and Micro-Porous Layers,” 2010 International Fuel Cell Workshop, Fuel Cell Center, Yuan Ze University, December 6, 2010, Taoyuan, TAIWAN
  3. “Development of Fuel Cell Activities for Automotive Application,” Graduate Seminar, Institute of Energy Engineering, National Central University, November 30, 2010, Taoyuan, TAIWAN
  4. “Fuel Cell Vehicle Commercial Applications,” Low Emission Light Vehicle Technical Standards and Validation International Forum, Taiwan Institute of Economic Research, December 1, 2010, Taipei, TAIWAN
  5. “Current Challenges in Fuel Cell Stack Research and Commercialization,” AIST FC-Cubic Mass Transfer Workshop, Polymer Electrolyte Fuel Cell Cutting-Edge Research Center, Advanced Industrial Science and Technology, January 8, 2010, Tokyo, JAPAN
  6. “Challenges and Opportunities of PEM Fuel Cell Research,” Tianda International Fuel Cell Workshop, State Key Laboratory of Engines, Tianjin University, December 23-23, 2009, Tianjin, CHINA
  7. “Challenges of Current Fuel Cell Stack Technology,” Canada-US Fuel Cell Modeling and Characterization Workshop, Institute of Fuel Cell Innovation, National Research Council, November 12-13, 2009, Vancouver, CANADA
  8. “Challenges and Opportunities of PEM Fuel Cell for Automotive Application,” Graduate Seminar, Chemistry Department, Chung-Yuan Christian University, December 29, 2008, Chung-Li, TAIWAN
  9. “PEM Fuel Cell for Automotive Application,” Graduate Seminar, Mechanical Engineering, Michigan Tech University, December 11, 2008, Houghton, Michigan, USA
  10. “Impact of Diffusion Media on Fuel Cell Operation,” 2008 Gordon Research Conference on Fuel Cells, July 20-25, 2008, Smithfield, Rhode Island, USA
  11. “Study of Water Management in a Polymer Electrolyte Fuel Cell,” Energy and Environment Research Laboratories, Industrial Technology Research Institute, September 29, 2004, Hsin-Chu, TAIWAN
  12. “Study of a Loop Heat Pipe using Neutron Radiography,” Graduate Seminar, Nuclear Engineering, The Pennsylvania State University, December 11, 2003, University Park, Pennsylvania, USA
  13. “Fundamental Studies of Loop Heat Pipes,” Thermal Division, U.S. Naval Research Laboratory, July 23, 2003, Washington D.C., USA
  14. “Introduction of General Operating Characteristics of Loop Heat Pipes,” Thermacore International, Inc., January 30, 2003, Lancaster, Pennsylvania, USA

Patents

  1. Optimized Gas Diffusion Media to Improve Fuel Cell Performance, US Pat. 8178259, February 2010
  2. Gas Diffusion Media Made from Electrically Conductive Coatings on Non-Conductive Fibers, US20110143262, December 2009
  3. Fuel cell with anode and cathode plate temperature difference, US20110076583, September 2009
  4. Method for Optimizing Diffusion Media with Spatially Varying Mass Transport Resistance, US7829230, July 2007
  5. Fuel Cell Stack with Improved End Cell Performance, US20080299418, June 2007
  6. Method of Making a Membrane Electrode Assembly Comprising a Vapor Barrier Layer, a Gas Diffusion Layer, or Both, US2007141405, November 2006
Joseph Fuehne

Journals

  1. Fuehne, J. P. (2008). Case Study: University-Industry Partnership to Educate Calibration Technicians and Improve Data Quality. The Journal for Quality and Participation, 31, 2, 27 - 30.(3)               Dues*, J., Fuehne*, J., Cooley, T., Denton, N., and Kraebber, H. (2008, in press). Assessment for continuous improvement: embedding it in the culture. Journal of Engineering Technology (JET), 28-2, 20 p.(5)               Fuehne*, J.P., and Engblom, J.J. (1992). A finite element / penalty function method for computing stresses near debonds. AIAA Journal, 30, 1625 – 1631.
  2. Fuehne*, J.P., and Engblom, J.J. (1989). A shear-deformable, doubly-curved finite element for the analysis of laminated composite structures. Composite Structures, 12, 81 – 95. DOI: 10.1016/0263-8223(89)90083-4.
  3. Engblom*, J.J., Fuehne, J.P., and Hamdallah, J.M. (1989) Transverse stress calculations for laminated composite shell structures using plate/shell finite element formulations”, Journal of Reinforced Plastics and Composites, 8, 446 – 457. DOI: 10.1177/073168448900800503.
  4. Fuehne*, J., and Baird, K. (2008). A Multi-Disciplinary Summer Camp: LEGO™ Mindstorms for Students and Teachers. the Technology Interface, Submitted October 7, 2008, Under Review.

Refereed Conference Proceedings

  1. Fuehne, J. (2010). Integrating mechatronics into an engineering technology curriculum. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  2. Fuehne, J. (2010). The Boiler Tech Challenge: A fun competition and recruiting tool for engineering technology programs. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  3. Fuehne, J. (2010). Developing a system approach for the engineering technology classroom. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  4. Fuehne, J. (2010). Virtual lab activities for a distance course in fluid power. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  5. Fuehne, J. (2008). Integrating Virtual Lab Simulation Software into an MET Program. Proceedings of the 2008 NAIT-IJME Conference, Nashville, Tennessee. Also being considered for re-publication in a refereed international IAJC journal such as the International Journal of Modern Engineering or the Technology Interface.Fuehne, J. (2008). Evolution of an Engineering Technology Outreach Program. Proceedings of the 2008 ASEE Annual Conference, Pittsburgh, Pennsylvania.
  6. Denton*, N., Kraebber*, H., Fuehne, J., Cooley, T., and Dues, J. (2007). The TC2K visit is done – now what?. Proceedings of the 2007 ASEE Annual Conference, Honolulu, HI, 9 p. Retrieve from http://www.asee.org/acPapers/AC%202007Full1687.pdf.
  7. Fuehne, J. (2006). Embedding multiple assessments in classroom activities. Proceedings of the 2006 International Mechanical Engineering Congress and Exposition, No. IMECE2006-13947, Presented November, 2006.
  8. Fuehne*, J., and Lenart, D. (2005).  Technology-hospital collaboration in thermodynamics: Experience with actual student projects. Proceedings of ASEE Annual Conference: The Changing Landscape of Engineering and Technology Education, Portland, Oregon. Retrieve from http://www.asee.org/acPapers/2005-298_Final.pdf.
  9. Ratcliff*, M. and Fuehne, J. (2006). Partnering with a neighborhood association to bring technology to as-risk urban students. Proceedings of the ASEE Annual Conference, Chicago, Illinois. Retrieve from http://www.asee.org/acPapers/code/getPaper.cfm?paperID=11237&pdf=2006Ful....
  10. Fuehne*, J., and Phillips, J. (2004). Introducing technology using LEGOs to at-risk and minority elementary students. Proceedings of ASEE Annual Conference: Engineering Education Reaches New Heights, Salt Lake City, Utah. Retrieve from http://www.asee.org/acPapers/2004-923_Final.pdf.
  11. Fuehne*, J., Taylor, W., Kim, J. and Lee, J.K. (2000). A predictive model for catalytic converter mat material, Proceedings of the Society of Automotive Engineers Congress, Detroit, Michigan.
  12. Fuehne*, J. and Engblom, J. (1991). A finite element / penalty function method for computing stresses near debonds. Proceedings of the 32nd SDM Conference, Baltimore, Maryland.
  13. Fuehne*, J. and Engblom, J. (1989). A shear deformable finite element penalty formulation for predicting transverse shear stresses in thick composite structures. Proceedings of the 4th Technical Conference on Composite Materials, Blacksburg, Virginia.
  14. Fuehne*, J. and Tippey, D. (1983).  Noseboom position error prediction data base update. Proceedings of the 14th Annual Symposium of the Society of Flight Test Engineers, Newport Beach, California.
Tatiana Goris
  1. Goris, T.V., & Dyrenfurth, M. J. (2012) Concepts and Misconceptions in Engineering, Technology, and Science. Overview of Research Literature. ASEE Illinois/Indiana Section Conference, Valparaiso University, Valparaiso IN, March 17th. http://ilin.asee.org/Conference2012/Papers/Goris.pdf
  2. Goris, T. V., & Dyrenfurth, M. J. (2011) Work in Progress- Analysis of Misconceptions of Engineering Technology Students About Electrical Technology Concepts. A Mixed Method Study. Paper presented at the FIE IEEE Annual Conference, Rapid City, SD, October 12-15. Session T4J. http://fie-conference.org/fie2011/sessions/T4J.htm
  3. Budyakov, V.V., & Goris T.V. (2010). Occurrence of Misconceptions and the Ways of Its Overcoming (In Russian). In Aspects of Industrial Development and Modernization of Education. Don State Technical University, Russia. ISBN 978-5-7509-1273-5.
  4. Goris, T. V., & Dyrenfurth, M. J. (2010) Students’ Misconceptions in Science, Technology and Engineering. Paper presented at the ASEE Illinois/Indiana Section Conference, Purdue University, West Lafayette, In. http://ilin.asee.org/Conference2010/Papers2010.html
  5. Goris, T.V., (2010). Book review: Thomas Kuhn, The Structure of Scientific Revolutions. Spring 2010 ASEE Student Newsletter. http://students.asee.org/?p=311

 

Qingyou Han

Journals

  1. S. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Alkali-Metal-Induced High Temperature Embrittlement in Al-Li Alloys,” Advanced Engineering Materials, 9 (2007), No.11, pp.981-986.
  2. S. Zhang, Q. Han, and Z.K. Liu, “Fundamental Understanding of Na-Induced High Temperature Embrittlement in Al-Mg Alloys,” Philosophical Magazine, 2007, vol. 87, no. 1, pp.147-157.
  3. Y. Cui, C. Xu, and Q. Han, “Microstructure Improvement in Weld Metal Using Ultrasonic Vibrations,” Advanced Engineering Materials, 9 (2007), No.3, pp. 161-163.
  4. H. Xu, T.T. Meek, and Q. Han, “Effects of Ultrasonic Field and Vacuum on Degassing of Molten Aluminum Alloy,” Materials Letters, 61 (2007), No. 4-5, pp. 1246-1250.
  5. Y. Cui, C.L. Xu, and Q. Han, “A Method of Eliminating the Unmixed Zone in AL-6XN Alloy Welds,” Scripta Materialia., 2006, vol.55, No.11, pp. 975-978.
  6. Q. Han, “Motion of Bubbles in the Mushy Zone,” Scripta Materialia., 2006, vol.55, No.10, pp. 871-874.
  7. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Modeling of the Al-Mg-Na System,” Journal of Alloys and Compounds, 2006, vol. 419, pp. 91-97.
  8. H. Xu, D.L. Xu, S. Zhang, and Q. Han, “Effect of the Alloy Composition on the Grain Refinement of Aluminum Alloys,” Scripta Materialia., 2006, vol. 54, n12, pp. 2191-2196.
  9. C. Xu, Z. Jia, D. Wu, Q. Han, and T.T. Meek, “Fabrication of nylon-6/Carbon Nanotube Composites,” Journal of Electronic Materials, 2006, Vol. 35, No. 5, p.954-957.
  10. C. Xu, J. Chen, Y. Cui, Q. Han, H. Coo, K. Liaw, and D. Wu, “Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes,” Advanced Engineering Materials, 2006, Vol. 8, No.1-2, pp.73-77.
  11. X. Jian, T.T. Meek, and Q. Han, “Refinement of Eutectic Silicon Phase of Aluminum A356 Alloy Using High-Intensity Ultrasonic Vibration,” Scripta Materialia., 2006, vol. 54, n5, pp. 893-896.
  12. S.J. Zhang, C. Brubaker, C. Jiang, M. Yang, Y. Zhong, Q. Han, and Z.K. Liu, “A Combined First-Principles Calculation and Thermodynamic Modeling of the F-K-Na System,” Materials Science and Engineering, A418 (2006), pp. 161-171.
  13. P.E. King, B.M. Golchert, T. Li, M. Hassan, and Q. Han, “Energy Efficient Operation of Aluminum Furnaces,” Aluminum World, Issue 9, 2006.
  14. Y. Cui, C.L. Xu, Q. Han, H. Choo, and P.K. Liaw, “Formation of Dendritic Nanotubes under an Electric Field,” Advanced Engineering Materials, vol. 7, No.9, 2005, pp.827-829.
  15. Q. Han, M.I. Hassan, S. Viswanathan, K. Saito, and S.K. Das, “The Reheating-Cooling Method: A Technique for Measuring Mechanical Properties in the Nonequilibrium Mushy Zones of Alloys,” Metall Mater Trans 36A, 2005, pp. 2073-2080.
  16. Q. Han, and H. Xu, “Fluidity of Alloys under High Pressure Die Casting Conditions,” Scripta Materialia., 2005, vol. 53, pp. 7-10.
  17. X. Jian, H. Xu., T.T. Meek, and Q. Han, “Effect of Power Ultrasound on Solidification of Aluminum A356 Alloy,” Materials Letters, vol. 59, issues 2-3, 2005, pp. 190-193.
  18. Q. Han, B.K. Kad, and S. Viswanathan, “The Design Perspective of Magnesium Die Casting Alloys,” Philosophical Magazine, vol. 84, issue 36, 2004, pp. 3843-60.
  19. Q. Han, and S. Viswanathan, “The use of thermodynamic simulation for the selection of hypoeutectic aluminum-silicon alloys for semi-solid metal processing,” Materials Science and Engineering A, v 364, n 1-2, Jan 15, 2004, pp. 48-54.
  20. Cailu Xu, Gongwei Wu, Zheng Liu, Dehai Wu, Thomas T. Meek, Qingyou Han, Preparation of copper nanoparticles on carbon nanotubes by electroless plating method, Materials Research Bulletin, 39 (2004), pp. 1499-1505.
  21. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Degassing of Molten Aluminum A356 Alloy Using Ultrasonic Vibration,” Materials Letters, v 58/29, 2004, pp. 3668-3672.
  22. Q. Han, J. Zeh, E. Hatfield, V.K. Sikka, “Dross formation during remelting of aluminum 5182 remelt secondary ingot (RSI),” Materials Science and Engineering A, v 363, n 1-2, Dec 20, 2003, pp. 9-14.
  23. Q. Han, A.J. Duncan, and S. Viswanathan, “Permeability Measurements of the Flow of Interdendritic Liquid in Equiaxed Aluminum-Silicon Alloys,” Metall. Mater. Trans., 34B (2003), pp. 25-28.
  24. Q. Han, and S. Viswanathan, “Analysis of the Mechanism of Die Soldering in Aluminum Die Casting,” Metall. Mater. Trans., 34A (2003), pp. 139-46.
  25. Q. Han, and S. Viswanathan, “Hydrogen Evolution during Directional Solidification and Its Effect on Porosity Formation in Aluminum Alloys,” Metall. Mater. Trans., 33A (2002), pp.2067-2072.
  26. Q. Han, S. Viswanathan, D.L. Spainhower, and S.K. Das, “The Nature of Surface Cracking in DC Cast Aluminum Alloy Ingots,” Metall. Mater. Trans., 32A (2001), pp.2209-11.
  27. A.J. Duncan, Q. Han and S. Viswanathan: “Measurement of Liquid Permeability in the Mushy Zones of Aluminum-Copper Alloys,” Metall. Mater. Trans. 30B (1999), pp. 745-750
  28. X. Wan, Q. Han and J.D. Hunt: “A Diffusion Solution for the Melting/Dissolution of a Solid at Constant Temperature and Its Use for Measuring the Diffusion Coefficient in Liquids,” Metall. Mater. Trans. 29A (1998), pp. 751-755.
  29. Q. Han: “Interaction of Particles with a Freezing Front,” (Invited) “Current Topics in Crystal Growth Research” 4(1998), pp. 147-154.
  30. Q. Han, H. Hu and X. Zhong: “Models for the isothermal Coarsening of the Secondary Dendrite arms in Multicomponent Alloys,” Metall Trans, 28B (1997), pp. 1185-1187.
  31. Q. Han and A. Hellawell: “Primary Particle Melting Rates and Equiaxed Grain Nucleation,” Metall Trans. 28B (1997), pp.169-173.
  32. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Acta Metall Mater. 45 (1997), pp. 3975-3979.
  33. J.D. Hunt, Q. Han and X. Wan: “Growth of a Cellular/Dendritic Array,” (invited paper), J. Mater. Sci. Technol., 13 (1997) 161-172.
  34. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” Matls Sci and Enging, A238 (1997), pp.192-195.
  35. Q. Han and J.D. Hunt: “Behavior of Particles near a Freezing Front,” Materials Review (Chinese), 10 (1996), pp.101-105.
  36. Q. Han, and J.D. Hunt: “On Particle Pushing During Solidification,” Acta Met. Sinica, 32 (1996) No.4, pp.1-6.
  37. X. Wan and Q. Han: “Theory of Array Growth of Cells/Dendrites,” Materials Review (Chinese), 10 (1996), pp.31-35.
  38. Q. Han, and J.D. Hunt: “Particle Pushing: The Critical Flow Speed Required to Put Particles Into Motion During Fluid Flow,” J. Crystal Growth, 152 (1995), pp. 221-227.
  39. Q. Han, and J.D. Hunt: “Redistribution of Particles during Solidification,” (Invited) ISIJ International (Special Issue on Recent Advances in Solidification), 35 (1995), pp. 693-699.
  40. Q. Han: “The Reasons for China’s Science & Technology Falling Behind the West in Modern Times,” Studies in Dialectics of Nature(Philosophy of Nature, Science and Technology, Science, Technology and Society)(Chinese), 11 (1995), No. 11, pp.9-14.
  41. Q. Han, and J.D. Hunt: “Particle Pushing: The Concentration of Particles near a Solid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 398-405.
  42. Q. Han, and J.D. Hunt: “Particle Pushing: The Attachment of Particles to the Solid-Liquid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 406-413.
  43. Q. Han, J.P. Lindsay, and J.D. Hunt: “The Effect of Fluid Flow on Particle Pushing,” Cast Metals, 6 (1994), pp. 237-.
  44. Q. Han: “The Phenomena of Particle Pushing and Its Mechanism,” Materials Review(Chinese), 8 (1994), pp. 91-96.
  45. Q. Han, and J.D. Hunt: “Particle Pushing: The Distribution of Particles in Liquid Near a Solid Surface,” Matls. Sci. and Enging, A173 (1993) pp.221-225.
  46. Q. Han, C. Zen, and H. Hu: “The Effects of Rare Earth Elements on the Properties and the Structure of Cast ZA-27 Alloy,” J.BUIST (Chinese), 14 (1992), No.1, pp.42-48.
  47. Q. Han, and H. Hu: “An Experimental Investigation into the Modification of the Corrosion Resistance of the ZA-27 Alloy with Rare Earth Elements,” J. Chinese Rare Earth, 10 (1992), No.3, pp.243-245.
  48. Q. Han, and H. Hu: “A Parameter for Evaluating the Ability of Solute Elements on Grain Refinement in Aluminium Alloy,” Cast Metals, 2, (1989) No.3, pp. 123-126.
  49. Y. Li, Q. Han, and X. Zhong: “The Magnetic Permeability of High Mn Cast Iron,” Foundry (Chinese), 1990, No.6, pp. 5-8.
  50. Q. Han: “A Mathematical Model for the Fluidity of Alloys,” J. BUIST(Chinese), 11(1989), No.4, pp.312-317.
  51. X. Zhong, and Q. Han: “Experimental Investigation Into the Possibility of Eliminating Annealing for Some Cast Iron Parts,” Foundry(Chinese), 1988, No.8, pp.22-24.
  52. X. Zhong. Q. Han, and W. Zhong: “The Influence of Macro-structure on the deformation of Gray Cast Iron,” Modern Casting (Chinese), 1988, No.1, pp.2-6.
  53. Q. Han, H. Hu, and X. Zhong: “The Effect of Ce on the Solidification Structure of Low Sulfur 16Mn Steel,” Acta Met. Sinica, 23 (1987), No.3, pp.176-181.
  54. Q. Han, H. Hu, and X. Zhong: “The Mathematical Models for the Isothermal Coarsening of Secondary Dendrite Arms,” Materials Science Progress (Chinese), 1 (1987), pp.33-39.
  55. Q. Han, and H. Hu: “The Effect of Solute Content on the Secondary Dendrite Arm Spacings for Multi-component Alloys,” J. BUIST(Chinese), 7 (1985), No.1, pp.1-11.

Refereed Conference Proceedings

  1. Q. Han, H. Xu, T.T. Meek, P. Ried, and P. Olson, “An Accelerated Method for Soldering Testing, “ NADCA Transactions 2007, paper T07-041.
  2. Q. Han, R. Dinwiddie, P. Sklad et al, “Comparison of Lost Foam Casting of AM60B Alloy and A356 Alloy, “ AFS Transactions 2007, Paper 07-147.
  3. Q. Han, “The Use of Power Ultrasound for Material Processing,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 97-106.
  4. Q. Liu, Y Gao, F. Qi, Q. Zhai, and Q. Han, “Influence of Power Ultrasonic on Solidification Structure and Segregation of 1Cr18Ni9Ti Stainless Steel,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 107-112.
  5. H. Xu, T.T. Meek, Q. Zhai, and Q. Han, “Degassing of Molten Aluminum Using Ultrasonic Vibrations,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 123-132.
  6. Q. Han, R. Dinwiddie, P. Sklad, K. Currie, F. Vondra, M. Abdelrahman, G.V. Walford, D. Nolan, and T. Nedkova, “Lost Foam Casting of Magnesium Alloys,” Magnesium Technology 2007, eds. R.S. Beals, M.O. Pekguleryuz, A. Lou, and N.R. Needlameggham, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 115-120.
  7. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Na-Induced Embrittlement in Mg-Li Alloys,” Symposium GG: Multiscale Modeling of Materials, MRS 2006 Fall Meeting, Boston, MA, USA, November 27-30, 2006.
  8. X. Jian, T.T. Meek, T. Geer, and Q. Han, “Effect of Power Ultrasound on Grain Refinement of Magnesium AM60B Alloy” Magnesium Technology 2006,, pp. 103-107.
  9. J. Clark III, A. Thekdi, S. Ninqileri, Q. Han, “Reconsideration of Natural-Gas Immersion Burners to Melt Recycled Aluminum,” Materials Science and Technology, Vol.3, Materials Science and Technology 2005 – Proceedings of the Conference, p. 3-9.
  10. A.L. Bowles, Q, Han, and J.A. Horton, “Castability of Magnesium Alloys,” Magnesium Technology 2005, pp. 99-104.
  11. H. Xu, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum Alloys,” Materials Science and Technology, V1, Materials Science and Technology 2005-Proceedings of the Conference, Pittsburgh, PA, USA, 2005, pp.3-11.
  12. X. Jian, C. Xu, T.T. Meek, and Q. Han, “The Effect of Ultrasonic Vibration on the Solidification Structure of A356 Alloy,” AFS Transactions, 2005, Paper No. 05-085.
  13. Q. Han, “An Experimental Die for Testing the Castability of Die Casting Alloys,” NADCA Transaction, 2005, Paper No. 05-087.
  14. M. Du, Q. Han, and R. Peterson, “Detection of Water Content in Aluminum Scrap with a Fast Neutron Source (Cf-252)”, Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 855-859.
  15. B.M. Golchert, C.Q. Chou, A. Quenette, Q. Han, P.E. King, “Combustion Space Modeling of An Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 887-892.
  16. P.E. King, M.C. Hayes, T. Li, Q. Han, M. Hassan, and B.M. Golchert, “Design and Operation of An Experimental Reverberatory Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 899-904.
  17. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing of Molten Aluminum under Reduced Pressure,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 915-919.
  18. Z. Long, Q. Han, S. Viswanathan, S. Ningileri, S.K. Das, K. Kuwana, M. Hassan, M. Khraisheh, A. Sabau, and K. Saito, “Integrated 3D Model to Simulate Solidification and Predict Hot Cracking during DC Casting of Aluminum Alloys,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 1057-1062.
  19. Q. Han, “The Use of Computational Thermodynamics for Die Casting Applications,” NADCA Transactions 2004, Paper T1-051.20.  Q. Han, “Dross Formation during Solidification of Aluminum 5182 Alloy RSI” Transactions of the American Foundry Society, v. 112, 2004, paper 04-063.21.  Q. Han, “Influence of Chemical Composition on Hot Tearing Susceptibility of FXS-414 alloy,” Transactions of the American Foundry Society, v. 112, 2004, paper 04-062.
  20. Q. Han, R.D. Peterson, and J. Zeh, “Some of the Factors that Affect Dross Formation in Aluminum 5182 RSI,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 163-168.
  21. Q. Han, M.I. Hassan, S. Viswanathan, K.Sato, and S.K. Das, “An Experimental Method for Determining Mechanical Properties in the Non-Equilibrium Mushy Zones of Alloys,” Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 211-220.
  22. X. Jian, Q. Han, H. Xu, and T.T. Meek, “Solidification of Aluminum Alloy A356 Under Ultrasonic Vibration”, Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp.73-79.
  23. H. Xu, X. Jian, T.T. Meek, Q. Han, “Investigation of Ultrasonic Degassing in Molten Aluminum A356 Alloy,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 731-735.
  24. Q. Han, “Dross Formation in Aluminum-Magnesium Alloy RSI,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  25. X. Jian, H. Xu, T.T. Meek, Q. Han, and S. Viswanathan, “Ultrasonic Solidification of Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  26. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  27. T. Li, M. Hassan, K. Kuwana, K. Saito, S. Viswanathan, and Q. Han, “Thermodynamic Analysis of Energy Utilization and Pollutant Formation Control in Secondary Aluminum Melting Furnaces,” Energy Efficient Manufacturing Processes (The MPMD Fourth Global Innovations Symposium), eds, I.E. Anderson, T.G. Marechaux, and C. Cockrill, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 43-51.
  28. Q. Han, W.A. Simpson, J.L Zeh, E.A. Kenik, P. Angelini, and V.K.Sikka, “The Effect of Solidification Defect on the Dross Formation During Re-melting of Aluminum 5182 Alloy RSI,” Light Metals 2003, ed. P.N. Crepeau, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 773-777.
  29. Q. Han, and S. Viswanathan, “Optimization of Aluminum 357 Alloy for Semi-Solid Metal Casting,” NADCA Transactions, 2002, T02-32.
  30. Q. Han, and S. Viswanathan, “Mechanism of Die Soldering during Aluminum Die Casting,” NADCA Transactions, 2002, T02-034.
  31. S. Viswanathan, C.A. Blue, Q. Han, G. Engleman, and N.B. Dahotre, “High Density Infrared Coatings for Soldering Resistance,” NADCA Transactions, 2002, T02-044.
  32. Q. Han and S. Viswanathan, D.L. Spainhower, and S.K. Das, “Nature and Formation of Surface Cracks in DC Cast Ingots,” Light Metals 2002, ed. W. Scheider, (Warrendale, PA: The Minerals, Metals & Materials Society, 2002), pp. 975-979.
  33. S. Viswanathan, A.S. Sabau, Q. Han, and A.J. Duncan, “Prediction of Microporosity Distributions in Aluminum Alloy Castings,” Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing, eds R. Abbaschian, H. Brody, and A. Mortensen, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.379-384.
  34. Q. Han, E.A. Kenik, R. Agnew, and S. Viswanathan, “Solidification Behavior of Commercial Magnisum Alloys,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.81-86.
  35. E.A. Payzant, S.R. Agnew, Q. Han, and S. Viswanthan, “Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp. 183-188.
  36. S. R. Agnew, S. Viswanathan, E. A. Payzant, Q. Han, K. C. Liu, and E. A. Kenik, "Tensile and Compressive Creep Behavior of Magnesium Die Casting, Alloys Containing Aluminium," Magnesium Alloys and Their Applications, ed. K.U. Kainer, (Weinbein, Germany: Wiley-VCH Verlag, 2000) pp.687-692.
  37. Q. Han and S. Viswanathan, “Microstructure Prediction in A356 Alloy Castings,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 609-614.
  38. Q. Han, E.A. Kenik, and S. Viswanathan, “Die Soldering in Aluminum Die Casting,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 765-772.
  39. A.J. Duncan, Q. Han and S. Viswanathan: “Liquid Permeability Measurements in Solidifying Aluminum-Copper Alloys,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.525-532.
  40. A.S. Sabau, Q. Han and S. Viswanathan: “Projection Methods for Interdendritic Flows,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.403-411.
  41. S. Viswanathan, A.J. Duncan, S.A. Sabau, Q. Han, W.D. Porter and B.W. Riemer: “Modeling of Solidification and Porosity in Aluminum Alloy Castings,” AFS Transactions, 98-103 (1998), pp. 411-417.
  42. S. Viswanathan, A.S. Sabau, Q. Han and A.J.Duncan: “Modeling of Porosity in Aluminum Alloy Castings,” Proceedings from Materials Solutions Conference ’98 on Aluminum Casting Technology, 1998, pp. 135-138..
  43. S. Viswanathan, A.J. Duncan, A.S. Sabau and Q. Han: “Prediction of Microporosity in Aluminum Alloy Castings,” Modeling of Casting, Welding and Advanced Solidification Processes-VIII, Eds. B.G.Thomas and C. Beckermann, (Warrendale, PA: The Minerals, Metals & Materials Society, 1998), pp. 849-856.
  44. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Solidification Processing 1997, eds. J. Beech and H. Jones, (Ranmoor House, Sheffield, England, 1997), pp. 397-400.
  45. Q. Han, X. Wan and J.D. Hunt: “Experimental Investigation on the Spacing of Dendrite Arrays,” TMS Spring Meeting, Anaheim, USA, Feb. 1996.
  46. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” MRS Fall Meeting, Boston, USA.,Dec 3-7, 1996.
  47. Q. Han and J.D. Hunt: “Criteria for Particle Pushing,” Proceeding of the Second Young Scientist Congress, (Beijing, China, 1995), pp. 81-85.
  48. J. D. Hunt, Q. Han, and S-Z Lu: “Numerical Modeling of Cellular/Dendritic Array Growth,” Keynote paper at the International Symposia on Advanced Materials and Technology for the 21st Century, JIM and TMS, Hawaii, USA, Dec.1995.

Pages