Publications

Research Publications and Presentations

Department: Engineering Technology

William Hutzel

Journals

  1. Koch, D.C, Hutzel, W.J., Kutch, J.M., and Holt, E.A. (2011). Toward a zero energy home:  applying Swiss building practices/attitudes to U.S. residential construction.  The Journal of Technology Studies, Vol. 37, No. 2, pp 18-26.
  2. Handy, R.G., Rodgers, K.L., Wang, J.A., Tumey, M.S., Rodriguez, D.L. and Hutzel, W.J., (2010). The characterization of aerosol particle contamination as the result of carry-over and cross-over in enthalpy wheels.  International Journal of Nanoparticles, Vol. 3, No. 4, pp 378-389.
  3. Koch, D.C., Kutch, J.M., Hutzel, W. J., and Holt, E.A., (2010). Comparison of U.S. and Swiss homes in the area of energy efficiency. The Technology Interface Journal, Vol. 10, No. 3, Retrieved from http://technologyinterface.nmsu.edu/Spring10, pp 1-13.
  4. Boregowda, S., Handy, R.G., and Hutzel, W.J., (2007). Thermodynamic assessment of human-thermal interaction. International Journal of Design and Nature, Vol. 2, No. 4, pp 310-318.
  5. Hutzel, W.J. and Healy, W. M., (2006).  Remotely accessed photovoltaic power experiment. Journal of Engineering Technology, Vol 23, No 1, pp 32-39.
  6. Hutzel, W. J., (2002). A remotely accessed HVAC laboratory for distance education. International Journal of Engineering Education, Vol 18, No 6, pp 711-716.
  7. Hutzel, W. J., Carson, J. M., and Peters, R.E., (1998).  The Purdue‘experiment’. Engineered Systems, Vol 15, No 9, pp 90-94.
  8. Hutzel, W. J. and Amini, A., (1995).  Field-testing a new locator device:  the UTD POLO System. No-Dig Engineering, Vol 2, No 3, pp 13-16.

Refereed Articles and Conference Papers/Presentations

  1. Hutzel, W. J., Shaurette, M.E. and Loss, B.W. (2012).  Competing in the 2011 Solar Decathlon. Proceedings of the 2012 ASEE Annual Conference, American Society for Engineering Education, San Antonio, TX, 12 p.
  2. Wallpe, Jordan, Hutzel, William, Lasker,  Gregory, and Cory, Clark, (2012) Evaluating Net-Zero Energy Houses from the U.S. Department of Energy Solar Decathlon 2011, Proceedings of the 2012 Construction Research Congress, Purdue University, IN
  3. Wallpe, Jordan and Hutzel, William, (2012), Engineering the INhome; Purdue's net-zero energy home for the U.S. Department of Energy Solar Decathlon 2011, Proceedings of the 2012 Summer Study on Energy Efficiency in Buildings, American Council for an Energy Efficient Economy, Asilomar, CA.
  4. Rodgers, Kevin, Hutzel, William, Dana, Michael, (2012), Biofiltration in a Highly Efficient Residential Home, Proceedings of 2012 Purdue High Performance Buildings Conference, West Lafayette, IN.
  5. Hutzel, W. J., Kilmer, W., Kilmer, R., Cory, C., Horton, W., Shaurette, M., Qian, Z., Hassan, R. And Day, J. (2011).  Preparing for the 2011 Solar Decathlon. Proceedings of the 2011 ASEE Annual Conference, American Society for Engineering Education, Vancouver, B.C., 9 p.
  6. Hutzel, W. J. and Parker, T. (2011).  Solar Workforce Development in the Midwest. Proceedings of the 2011 ASEE Annual Conference, American Society for Engineering Education, 6 p.
  7. Hutzel, W. J. Wilson, S., and Faiola, J.F. (2010). Performance of HVAC system with solar reheat. Proceedings of Purdue’s High Performance Buildings Conference, West Lafayette, IN, 8 p.
  8. Hutzel, W. J. and Glawe, D.D. (2009). S&T fellowship experiences in Washington, D.C. Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 57-63.
  9. Hutzel, W. J. and Odukomaiya, S. (2009). Optimizing Comfort and Energy Use in Reheat Systems. Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 261-270.
  10. Hutzel, W. J., Koch, D.C., Kutch, J.M., and Furter, R. (2009). Comparison of U.S. and Swiss Homes & Lifestyles, Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 253-260.
  11. Bertsch, S.S., Groll, E. A., Bouffard, D.B., and Hutzel, W.J., (2006), Air Source Heat Pump for Northern Climates II:  Measurement & Verification. Proceedings of 2006 International Refrigeration and Air Conditioning Conference, West Lafayette, IN,  8 p.
  12. Hutzel, W. J. and Furter, R., (2006).  International partnership for evaluating heat recovery equipment. Proceedings of the 2006 ASEE Annual Conference, American Society for Engineering Education, 9 p.
  13. Hutzel, W. J. and Furter, R., (2005).  International Partnership Using Remotely Accessed Labs. Proceedings of the 2005 Frontiers in Education Conference, American Society for Engineering Education, pp T4D-1-T4D-6.
  14. Hutzel, W. J., Cooper, H.L., and Leach, S.E., (2005).  Evaluating a remotely accessed energy laboratory. Proceedings of the 2005 ASEE Annual Conference, American Society for Engineering Education, pp 5899-5910.Best Paper Award for papers sponsored by the Energy Conversion & Conservation Division.
  15. This paper received the Best Paper Award for papers sponsored by the Energy Conversion & Conservation Division of ASEE.
  16. Hutzel, W. J. and Goodman, D. W., (2004).  Remotely accessible solar energy laboratory for high school students. Proceedings of the 2004 Frontiers in Education Conference, American Society for Engineering Education, pp S2D-18-S2D-22.
  17. Hutzel, W. J. and Kulatunga, N. A. (2002).  Design of a photovoltaic power system. Proceedings of the 2002 ASEE Annual Conference & Exposition, American Society for Engineering Education, pp 2529-2537.
  18. Hutzel, W. J. (2001).  Energy conservation in thermal power courses. Proceedings of the 2001 Annual Conference & Exposition, American Society for Engineering Education, pp 4167-4174.
  19. Hutzel, W. J. (2001).  Creating a virtual HVAC laboratory for continuing/distance education. Proceedings of the 2001 International Conference on Engineering Education, Oslo, Norway, 4 p.
  20. Hutzel, W. J. (2000).  Leveraging campus resources for HVAC laboratory development. Proceedings of the 2000 Annual Conference & Exposition, American Society for Engineering Education, pp 4077-4081.
  21. Hutzel, W. J. (1999).  Digital controls for an active solar collector loop. Proceedings of the 1999 ASME International Mechanical Engineering Congress & Exposition, Paper No 99-IMECE/MET-1.
  22. Hutzel, W. J., Dewitt, W. E., and Skvarenina, T. L. (1999).   An interdisciplinary facilities engineering graduate course. Proceedings of the 1999 Annual Conference & Exposition, American Society for Engineering Education, pp 733-739.
  23. Hutzel, W. J. (1998).  Building automation for a laboratory hydronic system. Proceedings of the 1998 ASME International Mechanical Engineering Congress & Exposition, Paper No 98-WA/MET-2, pp 1-4.
  24. Hutzel, W. J. (1998).  Development of a building automation laboratory. Proceedings of the 1998 Annual Conference & Exposition, American Society for Engineering Education, 6 p.
  25. Hutzel, W. J. and Pagano, M. A. (1997).  Design of a Foucault Pendulum museum exhibit. Proceedings of the 1997 ASME International Mechanical Engineering Congress & Exposition, Paper No 97-WA/MET-5, pp 1-4.
  26. Hutzel, W. J., Kraebber, H. W., and Thomas, C. R. (1997).  How many credits for an MET degree?. Proceedings of the 1997 Illinois/Indiana Section Conference, American Society for Engineering Education, pp. 126-133.
  27. Hutzel, W. J., Achor, P. D., Barnett, R. H., Eiff, M. A., Harding, B. A., and Kostek, T. E. (1997).  Sharpening pencils and young minds. Proceedings of the 1997 Annual Conference & Exposition, American Society for Engineering Education, 10 p.
  28. Best Paper Award for papers sponsored by the Design in Engineering Education Division.
  29. Hutzel, W. J. (1996).  An interdisciplinary solar energy project. Proceedings of the 1996 Frontiers in Education Conference, American Society for Engineering Education, pp 695-698.
  30. Hutzel, W. J. and Koontz, J. R. (1996).  Development of an interdisciplinary HVAC course. Proceedings of the 1996 Annual Conference & Exposition, American Society for Engineering Education, pp 1165-1170.
  31. Hutzel, W. J. (1995).  Maintaining continuity in a statewide heat power course. Proceedings of the 1995 ASME International Mechanical Engineering Congress & Exposition, Paper No 95-WA/MET-3, pp 1-4. 
  32. Hutzel, W. J. (1995).  Keeping in touch with industry. Proceedings of the 1995 World Conference on Engineering Education, Technology Based Education Consortium of the William C. Norris Institute, Vol 2, pp. 226-228.
  33. Best Paper Award for the Engineering Technology Division at the Conference

Patents

  1. (1)&(2) Residential Heat Pump with Two Stage Compression
  2. U.S. patent #7,654,104 dealt with economizing and oil management. 
  3. U.S. patent #7,810,353 dealt with capacity control for two stage compression.  
  4. (3) Method and apparatus for determining path orientation of a passageway·       
  5. U.S. patent #5,193,628 was issued for an earth drill guidance device used for in-situ environmental restoration at toxic waste sites.
J Jacob

Textbooks

  1. Analog Integrated Circuits Applications, 2000, Prentice-Hall
  2. Power Electronics: Principles & Applications, 2002, Delmar
  3. Advanced AC Electronics:Principles & Applications, 2004, Delmar
Henry Kraebber

Selected journal articles and conference papers

  1. Kraebber, H & Lehman, J. (2009). Use of Educational Technology in Manufacturing Engineering and Technology Education. 39th ASEE/IEEE Frontiers in Education Conference, October 2009. San Antonio, TX.
  2. Dues, J., Fuehne, J., Cooley, T., Denton, N., & Kraebber, H. (2008). Assessment for continuous improvement: Embedding it in the culture. Journal of Engineering Technology, 25(2), 10-17.
  3. Denton, N., Fuehne, J., Kraebber, H., Dues, J., & Cooley, T. (2007). The TC2K visit is done – now what?. [CD-ROM]. Proceedings of the 2007 Annual Conference, American Society for Engineering Education, Honolulu, HI.
  4. Kraebber*, H. W., Hartin, J. R., & Denton, N. D. (2005). Developing an educational process for an engineering technology program. [CD-ROM]. Proceedings of the 2005 Annual Conference, American Society for Engineering Education, Portland, OR.

Study Guides and/or Workbooks

  1. Contributed to a 70 course module series sponsored by the National Science Foundation that makes up the "novel" curriculum design for manufacturing engineering technology for the National Center of Manufacturing Education in Dayton, Ohio. Prof. Kraebber was responsible for the selection of authors and reviewers for these modules. He served as a co-author of approximately one third of each module and leader of the review process for all written material.
  2. Martin, T., Kraebber, H., & Stephens, M. (2003). Manufacturing Facilities Design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  3. Elliott, S. J., Hilbert, G. A. & Kraebber, H. W. (2003). Data Acquisition and Analysis. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 83 pages.
  4. Anderson, R., Castillo, A., Kraebber, H., & Lunn, T. (2002). Manufacturing resource planning. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  5. Anderson, S., Kraebber, H., & Martin, T. (2001). Equipment selection. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 103 pages.
  6. Gross, J., Kraebber, H., & Larsh, B. (2001). Manufacturing work cell design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 119 pages.

Textbooks

  1. Professor Kraebber is co-author with James Rehg of the text, Computer Integrated Manufacturing, 3rd ed, (2005).
  2. Dr. Kraebber's work has published in journals and confernece proceedings on teaching in manufacturing. Please send a message to request specific publications or for information about the textbook. kraeb@purdue.edu
Jan Lugowski

Published journal articles

  1. Lugowski, J. (1988). Harmonic-Drive-Getriebe selbst bauen  [How to Build a Harmonic Drive]. Werkstatt und Betrieb 121, No. 2, pages 109-111.
  2. Lugowski, J. (1985). Adaptives Grenzregelsystem einer Flachschleifmachine [An Adaptive Constraint Control System for a Surface Grinder]. Werkstatt und Betrieb 118, No. 4, pages 201-204.    
  3. Lugowski, J. (1992). Flow Force Compensation in a Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 12, No. 2, p. 22 (in Polish).
  4. Lugowski, J. (1991). Flow forces in a Spool-Type Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 11, No. 6, pages 15-20 (in Polish).

Reviewed conference proceedings (with presentation)

  1. Lugowski, J.T. (2003). Design Class Projects in Fluid Power. Proceedings of the American Society for Engineering Education (ASEE) – Annual Conference, June 22-25, CD-ROM - Session 3648, 10 msp. Nashville, Tennessee.
  2. Lugowski, J.T. (2003). Critical-Thinking Approach to Teaching Mechanical Engineering. Proceedings of the ASEE– Annual Conference, June 22-25, CD-ROM - Session 3449, 4 msp. Nashville, Tennessee.
  3. Lugowski, J.T. (2003). Introducing State-Of-The-Art Technology Into Fluid Power Laboratory. Proceedings of the ASEE – IL/IN Sectional Conference, April 4-5, - Session 2C, 4 msp. Valparaiso, Indiana.
  4. Lugowski*, J.T., Widmer*, S.E. (2002). Problem Based Learning of Data Acquisition and Computer-Based Control Applications in MET Courses. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 2359, 11 msp. Montreal, Quebec.
  5. Lugowski, J.T. (2002). Development of a Competency-Based Introductory Course in Fluid Power. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 1449, 8 msp. Montreal, Quebec.
  6. Lugowski, J.T. (2002). Good Problems for Fluid Power and Controls Courses. Proceedings of the ASEE – IL/IN Sectional Conference, April 11-12, (pages 217-221). Chicago, Illinois.
  7. Lugowski, J.T. (2001). Using Rapid Prototyping to Integrate Design into a Course. Proceedings of the ASEE – Annual Conference, June 24-27, CD-ROM - Session 2650, 11 msp. Albuquerque, New Mexico.
  8. Lugowski, J.T. (2001). Mastering a LabVIEW Program within one Lab Session. Proceedings of the ASEE – IL/IN Sectional Conference, March 29-31, 5 msp. Session S4-4. West Lafayette, Indiana.
  9. Denton*, N. L., Lugowski*, J., Knoll, J. (2000). Evaluation of an Industry Project in a Freshman Course. Proceedings of the ASEE – Annual Conference, June 18-21, CD-ROM - Session 2647, 9 msp. St. Louis, Missouri.
  10. Lugowski, J. (2000). Static-Pressure Measurements in the Orifice of a Hydraulic Valve. Proceedings of the American Society of Mechanical Engineers (ASME)  - Fluids Engineering Division Summer Meeting, June 11-15, CD-ROM paper No. FEDSM2000-11124, 5 msp. Boston, Massachusetts.
  11. Lugowski, J. (1999). One of the Mysteries in Fluid Mechanics. American Society for Engineering Education (ASEE) – Annual Conference, June 20-23, CD-ROM - Session 3548, 5 msp. Charlotte, North Carolina. This paper received a “Best Session Paper Award.”
  12. Lugowski, J. (1993). The Origin of the Flow Force in Hydraulic Valves. Proceedings of the 8th International Conference on Pneumatics and Hydraulics, pages 390-395 (in German). Miskolc, Hungary.
  13. Lugowski, J. (1993). The Source of the Flow Force in Hydraulic Piston Valves. Proceedings of the 9th Conference on Hydraulics and Pneumatics, pages 373-378 (in German). Dresden, Germany.
  14. Lugowski, J. (1993). Experimental Investigations of the Origin of Flow Forces in Hydraulic Piston Valves. In N. Way (Ed.), Proceedings of the International Conference on Fluid Power—the Future for Hydraulics, Brugge, Belgium, pages 233-244. London: Mechanical Engineering Publications Ltd.
  15. Lugowski, J. (1991). Flow Force Compensation in a Hydraulic Piston Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 503-504. Rolla: University of Missouri-Rolla.
  16. Lugowski, J. (1991). Flow Forces in a Spool-Type Hydraulic Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 374-375. Rolla: University of Missouri-Rolla.
  17. Batsch, A.* and Lugowski*, J. (1985). Dynamic Characteristics of the Hydrostatic Bearing as a Measuring Sensor. Proceedings of the 6th Conference on Hydraulics and Pneumatics, pages 561-566 (in German). Magdeburg, Germany.
  18. Lugowski, J. (1983). A Hydraulic Piston Valve with a Strongly Compensated Flow Force. Proceedings of the 5th Conference on Hydraulics and Pneumatics, pages 602-606 (in German). Dresden, Germany.
  19. Batsch*, A. and Lugowski*, J. (1981). Flow Force in a Piston Valve. Proceedings of the 4th Conference on Hydraulics and Pneumatics, pages 498-504 (in German). Magdeburg, Germany.
  20. Lugowski, J. (1980). An Analogue Model of an Adaptive Constraint Control System of a Surface Grinder. Proceedings of the International Conference on Adaptive Control in Mechanical Engineering AC’80, pages 184-193 (in Polish). Rydzyna, Poland.
  21. Lugowski, J. (1977). An Adaptive Constraint Control (ACC) System of a Surface Grinder. Proceedings of the Mechanical Engineering Committee of the Polish Academy of Sciences, pages 31-36 (in Polish). Rzeszow, Poland.

Published abstracts

  1. Lugowski, J. (2002). Fluid Power Education at Purdue. ASME Fluid Power Systems and Technology Division Newsletter, page 9. Spring edition.
  2. Lugowski, J. (1988). A Hydrostatic Bearing. Machine Design, September 8, page 36.

Patents

  1. Batsch*, A., and Lugowski*, J. (1986). Polish patent No. 131831. Testing Equipment for the Perforating Machine. Warsaw, Poland. Patent Office.
  2. Lugowski, J. (1986). Polish patent No. 141196. A Harmonic Drive. Warsaw, Poland. Patent Office.
  3. Lugowski, J. (1985). Polish patent No. 135336. A Sealing Diaphragm for Hydraulic Control Valves. Warsaw, Poland. Patent Office.
  4. Lugowski, J. (1984). Polish patent No. 133716. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  5. Lugowski, J. (1984). Polish patent No. 133718. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  6. Lugowski, J. (1984). Polish patent No. 133723. A Metering Valve. Warsaw, Poland. Patent Office.
  7. Lugowski, J. (1984). Polish patent No. 133717. A Hydrodynamic Bearing. Warsaw, Poland. Patent Office.
  8. Batsch*, A., Lugowski*, J. (1981). Polish patent No. 123378. A Hydraulic Valve with a Strongly Compensated Flow Force. Warsaw, Poland. Patent Office.
  9. Batsch*, A., Oczos*, K., and Lugowski*, J. (1981). Polish patent No. 110882. Perforating Machine for Plastic Tubes. Warsaw, Poland. Patent Office.
  10. Batsch*, A., and Lugowski*, J. (1980). Polish patent No. 113308. An ACC System of a Surface Grinder. Warsaw, Poland. Patent Office.                     

International lecture

  1. Flow Force in Hydraulic Valves, Institute for Fluid Power Drives and Controls  (IFAS) at Aachen University (RWTH), Germany. Professor Lugowski presented his research of flow forces in hydraulic valves (in 2003).

Locally published instructional materials

  1. Fletcher*, R.D., Lugowski*, J.T. and Stern*, H. (2002). Fluid Power. Facilitator Guide. 159 pages. National Center of Excellence for Advanced Manufacturing Education, Sinclair Community College, Dayton, Ohio.
  2. Lugowski*, J.T., Hutzel*, W.J. and Denton, N.L. (2002). Controls And Instrumentation For Automation, MET 382 Laboratory Manual. Spring 2003 Edition, 147 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: Copymat.
  3. Lugowski, J.T. 2009. MET 334 Advanced Fluid Power Laboratory Manual. 84 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: BoilerCopyMaker.
  4. Lugowski, J.T. 2009. MET 432 Hydraulic Control Motion systems Laboratory Manual. 78 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, BoilerCopyMaker.
  5. Lugowski, J.T., Widmer, S.E.(2009). MET 230L Fluid Power Laboratory Manual. 127 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, IN: Learning Systems.
  6. Lugowski, J. (1992). Obrabiarki. Laboratorium [Laboratory of Machine Tools] 2nd ed. upgraded, 109 pages. Department of Mechanical Engineering, Rzeszow, Poland: Rzeszow University of Technology Press.
Kevin Taylor

Articles

  1. Taylor, K.D.*, Thomson, K & Wilkinson, D. (2005). Project Lead the Way®: Teaching Technology in U.S. High Schools [CDROM: 18.pdf]  GCETE 2005 – Global Congress on Engineering and Technology Education.  Santos, Brazil.
  2. Mironovova, E., Taylor, K., Walekova, G.  (2004).  On-line international Internet meetings on professional issues [CDROM: F:\ – 4 pages]  Proceedings of ICL 2004.  International Conference on Interactive Computer Aided Learning, Villach, Austria   ISBN: 3-89958-089-3.
  3. Taylor, K.D.*, Denton, J.P. & Perusich, K.A. (2004). A distance education course with both lecture and laboratory Components [CDROM: F:\Proceedings\index.htm – 6 pages].  iCEER 2004 International Conference on Engineering Education.  iNEER Conference on Engineering Education and Research, Olomouc, Czech Republic.
  4. Taylor, K.* & Mironovová E. (2002). An update on a US-Slovak collaboration [CDROM: \html\Papers\O119.pdf – 3 pages]. ICEE 2002 International Conference on Engineering Education.  International Conference on Engineering Education, Manchester,UK.
  5. Kubik, S.* & Taylor, K. (2001). Distance education at Purdue University – School of Technology.  Schola Conference Proceedings (pp. 170-174).  Trnava, Slovakia.
  6. Taylor. K. (2001).  International collaborations: Barriers and benefits.  Co-Mat-Tech Conference Proceedings (pp. 630-635). Trnava, Slovakia.
  7. Taylor, K.* & Mironovová E. (2001). Using technical English in an international collaboration [CDROM:\papers\212.pdf – 4 pages].   ICEE 2001 Annual Conference Proceedings.  International Conference on Engineering Education, Oslo, Norway.
  8. Mironovová E.* & Taylor, K. (2001). Multimedia in engineering information transfer within international student collaboration.  Proceedings of the 2nd International DETECH Workshop (pp.199-202), Maribor, Slovenia.
  9. Taylor, K.* & Mironovová E. (2000). A model for an international collaborative student experience.   2nd Global Congress on Engineering Education Proceedings (pp. 323-325). Wismar, Germany: UNESCO International Centre for Engineering Education.
  10. Homkes* R., Morales, C., Taylor, K., & Foster, G. (2000). Implementing a VISION for the future of engineering and technology education. 2nd Global Congress on Engineering Education Proceedings (pp. 226-230). Wismar, Germany: UNESCO International Centre for Engineering Education.

Manuals

  1. Taylor, K., O’Connor, T., Herrick, R. (2003).  Lab Manual to Accompany DC/AC Circuit: Principles and Applications.  Clifton Park, NY: Thomson Delmar Learning
Charles Thomas

Referred Journal Papers

  1. Robertson, S. and Thomas, C.R. "Forced Motion of a Viscoelastic Solid," J. Acoust. Soc. Amer., 49, 1674-1675, 1971.
  2. Anderson, G. and Thomas, C.R. "A Forced Vibration Problem Involving Time Derivatives in the Boundary Conditions," J. Sound Vib., 14, 193-214, 1971.
  3. Thomas, C.R. "Simple Thickness Modes for Laminated Composite Materials," J. Sound Vib., 23, 341-361, 1972.
  4. Thomas, C.R. "Velocity Corrected Theory of Laminated Plates Applied to Free Plate Strip Vibrations," J. Sound Vib., 25, 407-431, 1972.
  5. Thomas, C.R. "Forced Extensional Vibrations of Plates," J. Sound Vib., 28, 121-132, 1973.
  6. Thomas, C.R. "Extensional Vibrations of Simply Supported Composite Plate Strips," J. Sound Vib., 30, 195-211, 1973.
  7. Thomas, C.R. "Flexural and Extensional Vibrations of Simply Supported Laminate Rectangular Plates," J. Acoust. Soc. Amer., 57, 655-659, 1975.
  8. Thomas, C.R. "Mass Optimization of Non-Conservative Cantilever Beams with Internal and External Damping," J. Sound Vib., 43, 483-498, 1975.
  9. Thomas, C.R. "Stability and Mass Optimization of Non-Conservative Euler Beams with Damping,"J. Sound Vib., 47, 395-401, 1976.
  10. Thomas, C.R. "Field Independence and Myers-Briggs Thinking Individuals,"Perceptual and Motor Skills, 57, 790, 1983.
  11. Thomas, C.R. "Field Independence and Technical Achievement," Perceptual and Motor Skills, 57, 858, 1983.
  12. Thomas, C.R. "Reexamination of Standard Scores Used in Grade Assignment,"Engineering Education, 74, 114-116, 1983.
  13. Thomas, C.R. "Personality in Engineering Technology," J. of Engineering Technology, 1, 32-36, 1984.
  14. Thomas, C.R. "Examination of a Formula Method for Assigning Letter Grades,"Engineering Education, 74, 673-675, 1984.
  15. Thomas, C.R. "Regression of Myers-Briggs Type Scales," Psychological Reports, 55, 568, 1984.
  16. Thomas, C.R. "The Need for Quality ET Textbooks that Facilitate Learning," J. of Engineering Technology, 1, No. 2, 32-40, 1984.
  17. Thomas, C.R. "Results of a MBTI Utilization in Engineering Technology," Journal of Psychological Type, Vol. 8, 42-44, 1984.
  18. Thomas, C.R. "Computer Programming Projects in Technology Courses," Engineering Education, Vol. 75, No. 8, 716-717, 1985.
  19. Thomas, C.R. "Technology Transfer Student Characteristics", Journal of EngineeringTechnology, Vol. 2, No. 1, 19-22, 1985.
  20. Thomas, C.R. "Rational Standard and Ability Adjusted Standard Transformed Scores Models," Educational and Psychological Measurement, Vol. 45, No. 4, 1985.
  21. Thomas, C.R. "Simplified Ability Adjusted Standard Scores," The International Journal of Applied Engineering Education, Vol. 1, No. 6, 435-438, 1986.
  22. Thomas, C.R. "Examination Reliability and Reliability-Weighted Composite Scores,"Engineering Education, Vol. 76, No. 4, 227-231, 1986.
  23. Thomas, C.R. "Field Independence and Technology Students' Achievement,"Perceptual and Motor Skills, Vol. 62, 859-862, 1986.
  24. Thomas, C.R. "Promotion and Tenure: More Tips", Engineering Education, Vol. 76, No. 7, 662-663, 1986.
  25. Thomas, C.R. "The MBTI, Technology Students, and Pre-College Achievement,"International Journal of Applied Engineering Education, Vol. 2, No. 5/6, 341-345, 1986.
  26. Thomas, C.R. "Assigning and Grading Student Computer Projects in Machine Elements", International Journal of Applied Engineering Education Vol. 3, No. 3, 307-313, 1987.
  27. Thomas, C.R. "Computer Usage and Minimum Learning Curve Computer Software in Engineering and Technology", International Journal of Applied Engineering Education, Vol. 4, No. 5, 409-413, 1988.
  28. Thomas, C.R., "Research in Technology: Implications and Alternatives", Journal of Engineering Technology, Vol. 6, No. 1, 39-41, 1989.
  29. Thomas, C. R., "Exploratory Studies of Psychological Type and Engineering Students: Three Brief Reports", Journal of Psychological Type, Vol. 18, 57-58, 1989.
  30. Thomas, C.R., "Three Methods for Performing Conditional Looping in a Spreadsheet",International Journal of Applied Engineering Education, Vol. 8, No. 4, 271-277, 1992.
  31. Thomas, C.R. and Hillsman, V.S., "Spreadsheet Software for Brakes and Clutches",Computers in Education Journal, Vol. III, No. 2, 1993.
  32. Thomas, C.R., "Developing User Focused Automated Spreadsheet Software in Engineering Technology", Computers in Education Journal, Vol. V, No. 3, 61-67, 1995.
  33. Thomas, C. R., "An Industry Technical Computer Usage Survey: A First Look",Computers in Education Journal, Vol. VI, No. 2, 38-42, 1996.
  34. Thomas, C.R., Giving Up the Chalkboard: Student Response and Instructor Observation," the Technology Interface, Fall, 1997, Vol.2 No. 1,http://et.nmsv.edu/netti
  35. Thomas, C.R., “Generation X at Technical College,” The Technology Interface, Winter, 1998, Vol. 2 No. 2, http//ct.nmsu.edu/~etti.
  36. Magill, M.A. and Thomas, C. R. “Exploring Teaching’s New Frontier”, Mechanical Engineering Vol. 122, No. 6, June 2000.
  37. Thomas, C. R., “A  Maple Auto-tutorial for Engineering and Technology Students,”Computers in Education Journal, Vol. XVI, No. 2, 2006

Additional Publications

  1. Thomas, C.R. "Forced Extensional Vibrations of Plates," Proceedings of the Army Symposium of Solid Mechanics, 1970 Lightweight Structures, 1970.
  2. Robertson, S. and Thomas, C.R. "A Method for Solution of Forced Motion Problems in Linear Viscoelasticity with an Application to an Annulus," Transactions of the Sixteenth Conference of Army Mathematicians, ARO-D Report 71-2, 629-648, 1971.
  3. Anderson, G. L. and Thomas, C.R. "On Forced Vibration Problems Involving Time Derivatives in the Boundary Conditions," Transactions of the Sixteenth Conference of Army Mathematicians, ARO-D Report 71-2, 273-206, 1971.
  4. Thomas, C.R. "The Microstructure Formulation of the Effective Stiffness Theory for Laminated Media," Watervliet Arsenal Technical Report WVT-7139, 1-56, 1971.
  5. Thomas, C.R. "Forced Extensional Vibrations of Plates," Watervliet Arsenal Technical Report WVT-7135, 1-23, 1971.
  6. Thomas, C.R. "Effective Stiffness and Effective Modulus Simple Thickness Modes for Laminated Media," Watervliet Arsenal Technical Report WVT-7138, 1-70,1971.
  7. Thomas, C.R. "An Investigation of Vibrations of Laminated Plates with Microstructure,"Watervliet Arsenal Technical Report WVT-7233, 1-57, 1972.
  8. Thomas, C.R. "Effective Modulus Plate Theories with Application to the Plate Strip, "Watervliet Arsenal Technical Report WVT-7251, 1-86, 1972.
  9. Thomas, C.R. "Extensional Vibrations of Simply Supported Composite Plate Strips,"Watervliet Arsenal Technical Report WVT-7263, 1-42, 1972.
  10. Thomas, C.R. "Simple Thickness Modes for Laminated Composite Materials,"Transactions of the Seventeenth Conference of Army Mathematicians, ARO-D Report 72-1, 403-473, 1972.
  11. Thomas, C.R. "A Couple-Stress Theory for Laminated Media," Watervliet Arsenal Technical Report R-WV-T-X-8-73, 1-32, 1973.
  12. Thomas, C.R. "Effective Stiffness Flexural Vibrations of Simply Supported Rectangular Plates with Velocity Correction," Watervliet Arsenal Technical Report R-WV-T-X-24-73, 1, 1973.
  13. Thomas, C.R. "Flexural Vibrations of Laminated Plate Strips," Transactions of the Eighteenth Conference of Army Mathematicians, ARO-D Report 73-1, 377-430, 1973.
  14. Thomas, C.R. "A Relative Optimization of Cantilever Euler Beams with Example for Hauger's Problem," Watervliet Arsenal Technical Report R-WV-T-6-26-73, 1-47, 1973.
  15. Thomas, C.R. "Extensional Vibrations of Simply Supported Laminated Rectangular Plates," Watervliet Arsenal Technical Report R-WV-T-X-28-73, 1-38, 1973.
  16. Thomas, C.R. "Flexure Equations of Motion for Laminated Composite Beams,"Watervliet Arsenal Technical Report R-WV-T-6-45-73, 1-20, 1973.
  17. Thomas, C.R. "Relative Optimization of Hauger's Problem with Circular Cross-Section," Watervliet Arsenal Technical Report R-WV-T-6-44-73, 1-37, 1973.
  18. Thomas, C.R. "Flexural and Extensional Vibrations of Simply Supported Laminated Rectangular Plates," Transactions of the Nineteenth Conference of Army Mathematicians, ARO Report 73-3, 439-500, 1973.
  19. Thomas, C.R. "Adjoint Variational Principle for the Stability of Beams with Internal and External Damping," Watervliet Arsenal Technical Report WVT-TR-74008, 1-37, 1974.
  20. Thomas, C.R. "The Relative Optimization of Hauger's Problem With Both Internal and External Damping," Watervliet Arsenal Technical Report WVT-TR-74025, 1-42, 1974.
  21. Thomas, C.R. "The Optimization of Hauger's Problem with Damping for a Circular Geometry," Watervliet Arsenal Technical Report WVT-TR-75032, 1-25, 1975.
  22. Thomas, C.R. "An Adjoint Variational Principle for the Mass Optimization of Nonconservative Beams with Internal and External Damping," Transactions of the Twentieth Conference of Army Mathematicians, ARO Report 75-1, 411-453, 1975.
  23. Thomas, C.R. "The Standard Linear Model in the Stability and Mass Optimization of Nonconservative Euler Beams," Transactions of the Twenty-First Conference of Army Mathematicians, ARO Report 76-1, 27-78, 1976.
  24. Thomas, C.R. "Simple Thickness Modes and Shear Correction Coefficients for Viscoelastic Timoshenko Beams," Watervliet Arsenal Technical Report WVTE-TR-76009, 1-19, 1976.
  25. Thomas, C.R. "The Standard Linear Model in a Viscoelastic Laminated Composite Beam Theory," Watervliet Arsenal Technical Report WVT-Tr-76010, 1-35, 1976.
  26. Thomas, C.R. "An Effective Stiffness Viscoelastic Composite Beam Theory,"Transactions of the Twenty-Second Conference of Army Mathematicians, ARO Report 77-1, 239-272, 1977.
  27. Thomas, C.R. "Techniques Used and Proposed for Recruitment of Technology Students," Proceedings 1981 College Industry Education Conference, 43-47, 1981.
  28. Thomas, C.R. "Assigning Grades More Fairly," ASEE 89th Annual Conference Proceedings, Vol. 2, 705-715, 1981.
  29. Thomas, C.R. "Reliability of Short Answer and Essay Exams," ASEE 90th Annual Conference Proceedings, Vol. 1, 38-45, 1982.
  30. Thomas, C.R. "The Need for Quality ET Textbooks that Facilitate Learning," 1983 ASEE Annual Conference Proceedings, Vol. 2, 342-350, 1983.
  31. Thomas, C.R. "Characteristics of Students who Transfer to Technology," 1984 ASEE Annual Conference Proceedings, Vol. 2, 447-452, 1984.
  32. Thomas, C.R. "Determination and Utilization of Reliability of Composite Scores," 1984 ASEE Annual Conference Proceedings, Vol. 2, 765-771, 1984.
  33. Thomas, C.R. "Easily Interpreted Standard Transformed Score Scales," 1984 Frontiers in Education Conference Proceedings, 509-514, 1984.
  34. Thomas, C.R. "Letter to the Editor", Journal of Engineering Technology, Vol. 1, No. 2, 1984.
  35. Thomas, C.R. "Letter to the Editor", Journal of Engineering Technology, Vol. 2, No. 1, 1985.
  36. Thomas, C.R. "Simplified Ability Adjusted Standard Scores," 1985 ASEE Annual Conference Proceedings, 1614-1617, 1985.
  37. Thomas, C.R. "A Survey of Technology Students," 1985 ASEE Annual Conference Proceedings, 1529-1532, 1985.
  38. Thomas, C.R. "The MBTI and Faculty Evaluation," 1985 ASEE North Central and Indiana-Illinois Section Conference Proceedings, 473-474, 1985.
  39. Thomas, C.R. "Problems of Promotion and Tenure for Technology Faculty at a Major University," 1986 ASEE Annual Conference Proceedings, 913-918, 1986.
  40. Thomas, C.R. "Analysis of a Technology Survey," 1986 ASEE Annual Conference Proceedings, 1480-1484, 1986.
  41. Thomas, C.R. "Student Computer Projects in Machine Elements," 1986 ASEE Annual Conference Proceedings, 1587-1599, 1986.
  42. Thomas, C.R. "Correlations Between Pre-college and Technology Course Achievement," 1986 ASEE North Central and Indiana-Illinois Sections Conference Proceedings, 14-19, 1986.
  43. Thomas, C.R. "Comparison of a Technology Computer Survey with Academic Achievement," 1986 ASEE North Central and Indiana-Illinois Sections Conference Proceedings, 98-107, 1986.
  44. Thomas, C.R. "A Survey of Technology Student Attitudes Regarding Computer Programming, High School Preparation, and College Careers," 1987 ASEE Annual Conference Proceedings, 129-133, 1987.
  45. Thomas, C.R. "Microcomputer Graphics in Kinematics" 1987 ASEE Annual Conference Proceedings, 459-463, 1987.
  46. Thomas, C.R. "A Survey of Student Motivation and Perceptions of Course Policy in an A-Exemption Elective Course" 1987 ASEE Annual Conference Proceedings, 1351-1354, 1987.
  47. Thomas, C.R. "A Microcomputer Gradebook and Course Management System" 1987 ASEE Annual Conference Proceedings, 1663-1670, 1987.
  48. Thomas, C.R. "Correlations Between Achievement in Technology Courses" 1987 ASEE Annual Conference Proceedings, 1839-1847, 1987.
  49. Thomas, C.R. "A Myers-Briggs Type Indicator Interpretation of a Student Survey,"1987 Frontiers in Education Conference Proceedings 656-659, 1987.
  50. Thomas, C.R. "The MBTI and Academic Achievement in Technology", 1987 Frontiers in Education Conference Proceedings, 660-663, 1987.
  51. Thomas, C.R. "Research in Technology: Implications and Alternatives", 1988 ASEE Annual Conference Proceedings, 199-201, 1988.
  52. Thomas, C.R. "A Regression Evaluation of Prerequisite Importance and Course Interrelationships in Technology", 1988 ASEE Annual Conference Proceedings, 164-168, 1988.
  53. Thomas, C.R. "Spreadsheet Applications in Technology", 1989 ASEE Annual Conference Proceedings, 499-504, 1989.
  54. Thomas, C.R., "MBTI Comparisons and a Course Grade Regression in a Technology Machine Elements Course", 1989 ASEE Annual Conference Proceedings, 660-662, 1989.
  55. Thomas, C.R., "Rapid MBTI Self-Classification", 1989 ASEE Annual Conference Proceedings, 1074-1075, 1989.
  56. Thomas, C.R. "Correlations Between Pre-College Achievement, Examination Items and Attendance in a Technology Dynamics Course:, 1989 ASEE Annual Conference Proceedings, 1190-1192, 1989.
  57. Thomas, C.R., "Letter To The Editor", Journal of Engineering Technology, Vol. 7, No. 1, 1990.
  58. Thomas, C.R., "Computer Software in a Technology Mechanism Kinematics and Dynamics Course", 1991 American Society for Engineering Education Illinois-Indiana Sectional Meeting Proceedings, 9 pages, 1991.
  59. Thomas, C.R., "Comments on a Computer Algorithm for Test Scaling", 1991 American Society for Engineering Education Illinois-Indiana Sectional Meeting Proceedings, 4 pages, 1991.
  60. Thomas, C.R., "The Need for Departmental Policies Regarding Student Computer Usage in Engineering and Technology", Proceeding 1991 Frontiers in Education Conference, 38-40, 1991.
  61. Thomas, C.R. and Hillsman, V.S., "Catalog Selection of Chain Drives Software", 1992 ASEE Annual Conference Proceedings, 590-593, 1992.
  62. Thomas, C.R. and Hillsman, V.S., "Spreadsheet Software for Brakes and Clutches",1992 ASEE Annual Conference Proceedings, 594-598, 1992.
  63. Thomas, C.R., "Computer Software in a Technology Machine Elements Course",Proceedings of 1993 ASEE IL/IN Sectional Meeting, 4 pages, 1993.
  64. Thomas C.R., "The True Power of Spreadsheet Lookup and Reference Functions in the Solution of Technology Design Problems", Proceedings of 1993 ASEE IL/IN Sectional Meeting, 4 pages, 1993.
  65. Thomas, C.R. and Hillsman, V.S., "Simple Word Rules for the Determination of Gear Force Directions", Proceedings of 1993 Frontiers in Education Conference, 862-865, 1993.
  66. Thomas, C.R. and Hillsman, V.S., "Power Screw Analysis Software", 1994 ASEE Annual Conference Proceedings, 2067-2071, 1994.
  67. Hillsman, V.S. and Thomas, C.R., "Spreadsheet Analysis of Eccentrically Loaded Fillet Welds", 1994 ASEE Annual Conference Proceedings, 2279-2283, 1994.
  68. Thomas, C.R., "Effectively Replacing Partial-Credit Examination Questions",Proceedings of 1995 ASEE Illinois/Indiana Sectional Meeting, 117-122, 1995.
  69. Thomas, C.R., "An Industry Technical Computer Usage Survey: A First Look",Proceedings of 1995 ASEE Illinois/Indiana Sectional Meeting, 475-479, 1995.
  70. Thomas, C.R. and Olesak, P.J., "A Comparison of Faculty To Industry Responses on an Industry Technical Computer Usage Survey ", 1995 ASEE North Central Section Annual ConferenceProceedings, 38-44, 1995.
  71. Thomas, C. R. and Hillsman, V. S., "Value Packed Student Spreadsheet Learning Experiences", Proceedings 1996 ASEE Southeastern Section Meeting, 332-336, 1996.
  72. Thomas, C. R., "Face-lifting Spreadsheets with Automated Data Entry", Proceedings of 1996 ASEE Illinois-Indiana Sectional Meeting, 79-87, 1996.
  73. Thomas, C. R. and Olesak, P. J., "Analysis of an Industry Technical Computer Usage Survey", 1996 ASEE North Central Section Annual Conference Proceedings, 431-441, 1996.
  74. Hutzel, W.J., Kraebber, H.W., and Thomas, C.R., "How Many Credits for an MET Degree?", Proceedings of 1997 Illinois/Indiana Sectional Conference, 126-133, 1997.
  75. Thomas, C.R., "Can Ancient BASICA Programs be Realistically Upgraded to Visual Basic?", Proceedings of 1997 Illinois/Indiana Sectional Conference, 31-37, 1997.
  76. Thomas, C. R. and Cooper, H. L., “A Seeming Paradox in Coil Spring Compression Analysis”, American Society for Engineering Education 2004 Illinois-Indiana Sectional Conference, 2004.
  77. Thomas, C. R., Kirk, T. E. and French, R. M.  “Dynamic Equations of Motion and the Many Faces of D’Alemberts Principle”, Proceedings of the 24th International Modal Analysis Conference, St. Louis, Missouri, CD-ROM, 2006.

Conference Presentations

  1. Thomas, C.R. "On Forced Vibration Problems Involving Time Derivatives in the Bound Conditions," Sixteenth Conference of Army Mathematicians, 1970.
  2. Thomas, C.R. "Simple Thickness Modes for Laminated Composite Materials,"Seventeenth Conference of Army Mathematicians, 1971.
  3. Thomas, C.R. "Simple Thickness Modes for Laminated Composite Materials," Eighty-Second Meeting of the Acoustical Society of America, 1971.
  4. Thomas, C.R. "Flexural Vibrations of Laminated Plate Strips," Eighteenth Conference of Army Mathematicians, 1972.
  5. Thomas, C.R. "Flexural and Extensional Vibrations of Simply Supported Laminated Rectangular Plates," Nineteenth Conference of Army Mathematicians, 1973.
  6. Thomas, C.R. "An Adjoint Variational Principle for the Mass Optimization of Nonconservative Beams with Internal and External Damping," Twentieth Conference of Army Mathematicians, 1974.
  7. Thomas, C.R. "The Standard Linear Model in the Stability and Mass Optimization of Nonconservative Euler Beams," Twenty-First Conference of Army Mathematicians, 1975.
  8. Thomas, C.R. "An Effective Stiffness Viscoelastic Composite Beam Theory," Twenty-Second Conference of Army Mathematicians, 1976.
  9. Thomas, C.R. "Recruiting Students," 88th ASEE Annual Conference, 1980.
  10. Thomas, C.R. "Assigning Grades More Fairly," 89th ASEE Annual Conference, 1981.
  11. Thomas, C.R. "Reliability of Short Answer and Essay Exams," 90th ASEE Annual Conference, 1982.
  12. Thomas, C.R. "The Need for Quality ET Textbooks that Facilitate Learning," 91st ASEE Annual Conference, 1983.
  13. Thomas, C.R. "Characteristics of Students who Transfer to Technology," 92nd ASEE Annual Conference, 1984.
  14. Thomas, C.R. "Determination and Utilization of Reliability of Composite Scores," 92nd ASEE Annual Conference, 1984.
  15. Thomas, C.R. "Results of a MBTI Utilization in Engineering Technology," 92nd ASEE Annual Conference, 1984.
  16. Thomas, C.R. "Easily Interpreted Standard Transformed Score Scales," 14th Annual Frontiers in Education Conference, 1984.
  17. Thomas, C.R. "Simplified Ability Adjusted Standard Scores," 93rd ASEE Annual Conference, 1985.
  18. Thomas, C.R. "A Survey of Technology Students," 93rd ASEE Annual Conference, 1985.
  19. Thomas, C.R. "The MBTI and Faculty Evaluation," 1985 ASEE North Central and Indiana-Illinois Sectional Meeting, 1985.
  20. Thomas, C.R. "Problems of Promotion and Tenure for Technology Faculty at a Major University," 94th ASEE Annual Conference, 1986.
  21. Thomas, C.R. "Analysis of a Technology Survey," 94th ASEE Annual Conference, 1986.
  22. Thomas, C.R. "Student Computer Projects in Machine Elements," 94th ASEE Annual Conference, 1986.
  23. Thomas, C.R. "Correlations Between Pre-college and Technology Course Achievement," 1986 ASEE North Central and Indiana-Illinois Sectional Conference, 1986.
  24. Thomas, C.R. "Comparison of a Technology Computer Survey With Academic Achievement," 1986 ASEE North Central and Indiana-Illinois Sectional Conference, 1986.
  25. Thomas, C.R. "A Survey of Technology Student Attitudes Regarding Computer Programming, High School Preparation, and College Careers" 95th ASCE Annual Conference, 1987.
  26. Thomas, C.R. "Microcomputer Graphics in Kinematics" 95th ASFE Annual Conference, 1987.
  27. Thomas, C.R. "A Survey of Student Motivation and Perceptions of Course Policy in an A-Exemption Elective Course" 95th ASEE Annual Conference, 1987.
  28. Thomas, C.R. "A Microcomputer Gradebook and Course Management System" 95th ASEE Annual Conference, 1987.
  29. Thomas, C.R. "Correlations Between Achievement in Technology Courses", 95th ASEE Annual Conference, 1987.
  30. Thomas, C.R. "A Myers-Briggs Type Indicator Interpretation of a Student Survey",17th Annual Frontiers in Education Conference, 1987.
  31. Thomas, C.R. "The MBTI and Academic Achievement in Technology", 17th Annual Frontiers in Education Conference, 1987.
  32. Thomas, C.R. "Research in Technology: Implications and Alternatives", 96th ASEEAnnual Conference, 1988.
  33. Thomas, C.R. "A Regression Evaluation of Prerequisite Importance and Course Interrelationships in Technology", 96th ASEE Annual Conference, 1988.
  34. Thomas, C.R. "Spreadsheet Applications in Technology", 1989 ASEE Annual Conference, 1989.
  35. Thomas, C.R., "MBTI Comparisons and a Course Grade Regression in a Technology Machine Elements Course", 1989 ASEE Annual Conference, 1989.
  36. Thomas, C.R., "Rapid MBTI Self-Classification", 1989 ASEE Annual Conference, 1989.
  37. Thomas, C.R., "Correlations Between Pre-College Achievement, Examination Items and Attendance in a Technology Dynamics Course", 1989 ASEE Annual Conference, 1989.
  38. Thomas, C.R., "Computer Software in a Technology Mechanism Kinematics and Dynamics Course", 1991 American Society for Engineering Education Illinois-Indiana Sectional Meeting, 1991.
  39. Thomas, C.R., "Comments on a Computer Algorithm for Test Scaling", 1991 American Society for Engineering Education Illinois-Indiana Sectional Meeting, 1991.
  40. Thomas, C.R., "The Need for Departmental Policies Regarding Student Computer Usage in Engineering and Technology", 1991 Frontiers in Education Conference, 1991.
  41. Thomas, C.R., "Computer Software in a Technology Machine Elements Course", 1993 ASEE IL/IN Sectional Meeting, 1993.
  42. Thomas, C.R., "The True Power of Spreadsheet Lookup and Reference Functions in the Solution of Technology Design Problems", 1993 ASEE IL/IN Sectional Meeting, 1993.
  43. Thomas, C.R., "Effectively Replacing Partial-Credit Examination Questions", 1995 ASEE Illinois/Indiana Sectional Meeting, 1995.
  44. Thomas, C.R., "An Industry Technical Computer Usage Survey: A First Look", 1995 ASEE Illinois/Indiana Sectional Meeting, 1995.
  45. Thomas, C.R., "Can Ancient BASICA Programs be Realistically Upgraded to Visual Basic?, 1997 Illinois/Indiana Sectional Conference, 1997.
Haiyan (Henry) Zhang

Articles: Selected Publications from peer-reviewed papers & book chapters

  1. Jun Du, Shaoping Wang, Haiyan Zhang ((2013). Layered Clustering Multi-fault Diagnosis for Hydraulic Piston Pump, Mechanical Systems and Signal Processing, 36(2), 487-504. 
  2. Liang, R., Ye, W., Zhang, H. H., & Yang, Q. (in press). The Thermal Error Optimization Models for CNC Machine Tools, International Journal of Advanced Manufacturing Technology.          
  3. Ligata, H., & Zhang, H. H. (2012). Geometric Definition and Contact Analysis of Spherical Involute Straight Bevel Gears, International Journal of Industrial Engineering & Production Research (IJIEPR), 23(2), 101 – 111.
  4. Ryne McHugh, H. Henry Zhang, Virtual Prototyping of Mechatronics for 21st Century Engineering and Technology, International Journal of Engineering Research & Innovation, Fall/Winter 2011, Vol. 3, No. 2, pp. 69-75.
  5. Henry Zhang, Machining Chatter Suppression via Lyapunov Stability Based Model Reference Adaptive Control, International Journal on Intelligent Technologies abd Engineering Systems, Sept. 2011, pp. 39 -47.
  6. Yuequan Wan, Henry Zhang, Mark French, Fractional Order PID Design for Nonlinear Motion Control Based on Adept 550 Robot, International Journal of Modern Engineering, Vol. 12, No. 1, 2011, pp. 11 – 19.
  7. Haris Ligata, Henry Zhang, Overview and  Design of Near-net Formed Spherical Involute Straight Bevel Gears, International Journal of Modern Engineering, Vol. 11, No. 2, 2011, pp. 47 – 53.
  8. Henry Zhang, PID Controller Design for A Nonlinear Motion Control Based on Modeling the Dynamics of Adept 550 Robot, International Journal of INdustrial Engineering and Management (IJIEM), Vol. 1, No.1, 2010
  9. Haiyan Zhang, Jun Ni, Internal Energy Based Analysis on Mechanism of Spindle Speed Variation for Regenerative Chatter Control, Journal of Vibration and Control, Vol. 16, Issue 2, Feb. 2010, pp. 281-301
  10. Haiyan Zhang, Todd Haran, A New Type of Digital Valve Actuated by Piezoelectric Ultrasonic Motor, Proceedings of The Second Workshop on Digital Fluid Power, Nov. 12-13, 2009, Linz, Austria, pp. 21-32
  11. Haiyan Zhang, M. J. Jackson, J. Ni, Machining Stability Based on Phase Difference and Its Sensitivity, Journal of Manufacturing Technology Research, Vol. 1, Issue ½, 2009, ISSN 1943-8095, 2009 Nova Science Publishers, , 1-20
  12. Haiyan Zhang, M. J. Jackson, J. Ni, Stability Analysis on Spindle Speed Variation Method for Machining Chatter Supression, International Journal of Machining and Machinability of Materials – Special Issue on ‘Next Generation Grinding Wheels’, Vol. 5, No. 1, 2009, pp. 107 – 128
  13. Haiyan Zhang, A Model-Based Multidisciplinary Correspondent Methodology for Design-by-Analogy, 2008 ASEE North Midwest Section Conference, Educating the Engineer of 2020, Platteville Wisconsin, Oct. 16-18, 2008
  14. Haiyan Zhang, Jun Ni, Mark Jackson, Machining Stability (Chapter 2), Machining with Nanomaterials, Springer, 2008, pp. 39-66
  15. Haiyan Zhang, Jun Ni, Mark Jackson, Machining Chatter Suppressing (Chapter 3), Machining with Nanomaterials, Springer, 2008, pp. 67-96
  16. Haiyan Zhang, Jun Ni, "Phase Difference And Its Sensitivity Analysis for a Nonlinear Machining Chatter Model", North American Manufacturing Research Institution, Society of Manufacturing Engineers,1994
  17. Vicken S. Kasparian, Celal Batur, Haiyan Zhang., Joseph Padovan, "Davidon Least Squares Based Learning Algorithm for Feedforward Neural Networks", IEEE Transaction , International Journal of Neural Network, Vol. 7, No. 4, pp. 661-670, 1994
  18. Yueh-Jaw Lin and Haiyan Zhang, "Simplification of Manipulator Dynamic Formulations Utilizing A Dimensionless Method", Robotica, Cambridge University Press, Vol. 11, Issue 2, 1993, pp. 139-147
  19. Celal Batur, Haiyan Zhang, Joseph Padovan, Vicken S. Kasparian, "Davidon Least Square Based Neural Network Learning Algorithms", Proceedings of the American Control Conference. Published by IEEE. Catalog Number 92CH3072-6 pp 973-978, 1992
  20. Haiyan Zhang, Yueh-Jaw Lin, Minghui Xu, "Non-dimensional Method for Modeling and Simplification of Robot Manipulator Dynamics", Proceedings of 2nd National Applied Mechanics and Robotics Conference, November 1991, pp IIB.1-1 – 1-7

Patents

  1. Optical Automatic Transmission Sensor, 65018.P1.US, (in process), December, 2007.

Department: Technology Leadership & Innovation

Donald Buskirk

Articles

  1. Buskirk, D. D. Adoption of Electronic Invoicing By General Line Distributors, National Electronic Distributors Association, Number 1 Vol. 6, 2007·
  2. Buskirk, D. D. Personal and Professional Job Skills for Industrial Safety Managers, National Association of Industrial Technology, Selected Research Paper. P.132-136, Nov. 06
  3. Buskirk, D. D. Project Based Learning for Freshmen Industrial Organization. Proceeding for American Society of Engineering Education. 05.
Kari Clase

Articles

  1. Ertmer P, Freemyer S, Adedokun O, Clase KL (in press) The Grand Challenge: Helping teachers learn/teach cutting edge science via a PBL Approach. 2012 Annual Meeting of the American Educational Research Association, Vancouver, British Columbia.
  2. Clase KL, Halverson K, Heyden R (in press) Using Second Life in a formal STEM classroom to learn how to represent annotated genomes and develop a sense of community. 2012 Annual Meeting of the National Association Research in Science Teaching, Indianapolis, Indiana.
  3. Goodpaster K, Adedokun O, Kirkham L, Ertmer P, Clase K, Weaver G (in press) The impact of a professional development workshop on rural STEM teachers’ self-efficacy and biofuels knowledge. (in press). 2012 Annual Meeting of the National Association Research in Science Teaching, Indianapolis, Indiana.
  4. Adamo-Villani N, Clase KL, Heyden R, Wiecha J (in press) Constructing self-discovery learning spaces online: Scaffolding and decision making technologies. Hai-Jew, Shalin (Ed.). IGI Global Publishing.
  5. Clase KL, Gundlach E, Peleaz N (2010) Calibrated peer review for computer-assisted learning of biological research competencies Biochemistry and Molecular Biology Education, 38, 290-295.
  6. Clase KL (2009).  Engagement Through a dual credit initiative resulting in collaborative partnerships to create pre-engineering biotechnology curriculum for the K12 classroom. Proceedings of Frontiers in Education 39th Annual Conference: IEEE Education Society, October.
  7. Clase KL, Adamo-Villani N, Gooding L, Yadav A, Karpicke J, Gentry M (2009) Enhancing Creativity in Synthetic Biology with Interactive Virtual Environments. Proceedings of Frontiers in Education 39th Annual Conference: IEEE Education Society, October.
  8. Clase KL (2008) Design and implementation of an interdepartmental biotechnology program across engineering technology curricula.  Journal of Technology Studies, 34, 12-19.
  9. Clase KL, Hein PW, Pelaez NJ (2008) Demand for interdisciplinary laboratories for physiology research by undergraduate students in biosciences and biomedical engineering. Advances Physiology Education, 32, 256-260.
  10. Clase, K. L. (2007) Promoting Creativity and Innovation in an Entrepreneurial Certificate Program through Science and Technology Inquiry-Based Learning Modules for Introductory Biotechnology.  Technology Interface. Fall 2007.
  11. Clase KL, Mitchell PJ, Dorman CM, Johnson SE, Hannon K. (2000)  FGF5 stimulates expansion of connective tissue fibroblasts and inhibits skeletal muscle development in the limb.  Developmental Dynamics. 219 (3):  368-80.
  12. Steenstrup T, Clase KL, Hannon KM. (2000)  Rapid quantification of cell numbers using computer images.  Biotechniques. 28(4):  624-6, 628.
  13. Morris RC, Galicia MC, Clase KL, Elliott MS. (1999) Determination of queuosine modification system deficiencies in cultured human cells.  Mol Genet Metab. 68 (1):  56-67.
  14. Kudla AJ, Jones NC, Rosenthal RS, Arthur K, Clase KL, Olwin BB. (1998)  The FGF receptor-1 tyrosine kinase domain regulates myogenesis but is not sufficient to stimulate proliferation.  Journal of Cell Biology. 142 (1):  241-50.
  15. Hannon K, Kudla AJ, McAvoy MJ, Clase KL, Olwin BB. (1996)  Differentially expressed fibroblast growth factors regulate skeletal muscle development through autocrine and paracrine mechanisms.  Journal of Cell Biology. 132 (6):  1151-9.
Alexander Crispo

Conferences Attended

  1. Davis, B., Crispo, A., & Wagenheim, G. (2011). A leadership guide for using Appreciative Inquiry intervention in overcoming miserable jobs.  Proceedings of the 39th Annual International Association for Experiential Education (AEE), Jacksonville, FL. 
  2. Davis, B., Crispo, A. & Wagenheim, G. (2009).  Co-constructing positive feedback using appreciative inquiry.  Proceeding of the Thirty Ninth Conference of the International Society for the Exploration of Teaching and Learning, Philadelphia, PA,  Electronic Proceedings. 
  3.  Wagenheim, G., Bennett, J., Clark, R. & Crispo, A. (2009). Toward becoming a better teacher: Using visual images to explore and challenge assumptions we hold about our teaching. Organizational Behavior Teaching Society Conference, Charleston, SC,  Electronic Proceedings 
  4. Crispo *, A. & Ncube, L. (2007). Conventional teaching and the gestalt alternative.Proceeding of the Thirty Seventh Conference of the International Society for the Exploration of Teaching and Learning, Atlanta, GA,   Electronic Proceedings. 
  5. Wagenheim*, G, Crispo A., & Clark, D. (2007) Mirror image: Do our personal hobby and sport pursuits reflect who we are and how we teach? Proceeding of the Thirty Seventh Conference of the International Society for the Exploration of Teaching and Learning, Atlanta, GA, Electronic Proceedings. 
  6. Ncube*, L., Crispo, A., Davis, B., & Wagenheim, G. (2007).  Generational cultures: Leaders bridging the generational gaps and maximizing potential in the work place.International Leadership Association 9th Annual Conference, Vancouver, Canada,  Electronic proceedings. 
  7.  Davis*, B., Summers, M., Crispo, A., Vandeveer, R., & Strate, M. (2006) Meaningful classroom activities for interactive student learning are where the rubber meets the road at the crossroads of Leadership studies. International Leadership Association 8th Annual Conference, Chicago, IL,   Electronic proceedings.  
  8. Crispo*, A. & Wagenheim, G. (2006) Exploring teaching and learning in a “World Café”: An easy-to-use method for creating collaborative conversations. Proceedings of the Thirty Sixth Conference of the International Society for the Exploration of Teaching and Learning, Palm Springs, CA,  Electronic proceedings. 
  9. Crispo*, A., Vandeveer, R., & Sugarman, H. (2005) Appreciative inquiry helps define “best-in-class leadership”: An exciting philosophy for change. International Leadership Association 7th Annual Conference, Amsterdam, Netherlands,   Electronic proceedings. 
  10. Crispo, A. (2005) An interdisciplinary approach to service learning: Using “Appreciative Inquiry” as a catalyst to community Revitalization. Proceedings of the Thirty Fifth Conference of the International Society for the Exploration of Teaching and Learning, Cocoa Beach, FL,  Electronic Proceedings. 
  11. Crispo, A. (2004). Students appreciate “Appreciative Inquiry”: Sharing positive learning experiences. Proceedings of the Thirty Fourth Conference of the International Society for the Exploration of Teaching and Learning, Baltimore, MD,   Electronic Proceedings.

Pages